How do I program my black Comcast remote?

How do I reset my Xfinity remote control?

Factory Reset the Xfinity Voice Remote without a Setup Button (XR15)
  1. Press and hold the A (triangle) and D (diamond) buttons at the same time for three seconds until the status light changes from red to green.
  2. Press 9-8-1.
  3. The LED will blink blue three times to indicate that the remote was reset.

How do I program my Comcast remote without a code?

How do I program my Comcast remote to my Samsung TV?

Power on your Samsung TV. Press and hold the SETUP button until the signal light flashes a green light. Press the Xfinity button on the remote. Enter the three-digit code displayed on your screen.

Why is my TV not responding to the remote?

A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.

How do you pair a remote to a TV?

The next steps will depend on your TV menu options:
  1. Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.
  2. Select Remote control — Connect via Bluetooth.
  3. Select Voice Remote Control — Activate button.

What is the Comcast remote code for a Samsung TV?

Taken from the Comcast Custom DVR 3-Device universal remote manual, the codes for Samsung LCD televisions are 10812, 10766 and 10814. The codes for all other Samsung televisions are 10060, 10812, 10702, 10179, 10030, 10766, 10814, 11060 and 11903.

How do I pair my Comcast remote to my Samsung Soundbar?

Programming an Xfinity X1 Remote to Your Soundbar
  1. Make the Soundbar the receiver output.
  2. Press the Setup button on your Xfinity X1 remote.
  3. Wait until the LED light at the top turns green.
  4. Enter the Soundbar’s manufacturer code.
  5. Wait for the LED light to flash twice (in green)
  6. Test the remote.

How do I pair my Xfinity XR15 remote to my Samsung TV?

Pair the XR15 Remote to a TV

While the TV is on, press and hold the xfinity and Mute buttons on the remote together for five seconds until the remote light at the top changes from red to green. Enter the first five-digit code listed for the TV manufacturer.

What is Samsung TV code?

Samsung 4 digit remote control codes:

0019, 0618, 0644 , 0056. 0060, 0587 , 0037, 0178. 0030, 0556, 0009, 0702. 0774, 0093, 0217, 0448.

What is 4 digit code for Samsung TV?

The generic PIN for Samsung TVs is 0000 – or four zeros.

How do I link my remote to my Samsung TV?

On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.

What can I say to my Xfinity remote?

You can now turn Voice Guidance on with voice control – simply press and hold the voice control button on your Voice Remote and say “Voice Guidance.” The voice control button is the third button up from the OK button in the center of the Voice Remote.

How do I pair my xr15 remote to my receiver?

Press and hold Xfinity and Info (i) buttons together for 5 seconds until the LED turns GREEN. Follow the TV on-screen instructions to enter the 3-digit code that appears. The remote is now paired and the cable box should now respond to any keypress, even when hidden in a cabinet.

How do I pair my remote to my set top box remote?

Can you use any TV remote on any TV?

You can program the TV remote to enjoy the functionality of controlling your TV and Set Top Box(STB) simultaneously. Press and hold the STB button, then press the corresponding code while still holding the STB button. Release the STB button when done. – If successful, the STB button LED will turn RED and blink twice.

How do you pair one remote?

A Universal TV remote will work with any device model for almost all manufacturers and may be compatible with multiple devices. A remote control app is also a good option as they are available from most manufacturers and can be operated via a smartphone or tablet.

How do I sync my remote to my cable remote?

Step 1: First, press down the MAGIC key on your remote. Step 2: Next, select the device you want to control. Step 3: Finally, hold down the digit on the remote for your brand & device (e.g. 6 for Samsung TV). As soon as the device turns off, release the key and the LED on the remote will blink twice.