How do I reset my LG refrigerator panel?

Press and hold both the REFRIGERATOR AND ICE PLUS buttons simultaneously for five seconds. After five seconds of holding the buttons, the control panel will sound, and the temperature settings display will confirm that DEMO MODE has been deactivated.

How do I put my LG refrigerator in diagnostic mode?

To put your LG refrigerator in Test Mode 1, locate the “Freezer Temp” function. But keep in mind that some units have a dedicated “TEST” button. If yours is one of them, press the button for the amount of time indicated instead. Then, press the “Express Freezing” and “Colder” choices at the same time.

What does E error code mean on LG refrigerator?

1-2 of 2 Answers

LG Refrigerator Error Code Er IF & LG Refrigerator Error Code Er 1F. The Er IF Error Indicates The Ice Maker Blower Fan has a Loose Wiring Connection or may be Frozen or the Ice Maker Motor is Faulty.

How long do I unplug my fridge to reset it?

Usually I would unplug it for about 5 minutes. This lets the refrigerant pressures in the system to equalize. It should also give the electronics time to reset.

What is FF error code LG refrigerator?

A FF error code indicates that the unit has detected an issue with the freezer fan. This can sometimes be caused by frost buildup. … Make sure the vents inside the refrigerator are not blocked, the refrigerator and doors are properly leveled, and the refrigerator and freezer doors are closed completely.

How do I reset my LG fridge after power outage?

Try unplugging the unit or trip the circuit breaker for 30 seconds to RESET THE REFRIGERATOR. You should hear the compressor kick back on and the unit will stabilize and start cooling within 24 hours.

What does FF mean on a fridge?

freezer fan motor
The freezer fan motor is malfunctioning according to the FF error code. If the fan is not turning because of ice, you can get this code. Check the gasket around the doors for damage or the gasket may have come off the fridge door.

What does ER FF mean on my refrigerator?

The error code ER FF indicates that the refrigerator control board detects a problem with the evaporator fan in the freezer. This error code will not clear until the problem with the freezer fan is corrected.

What does FF mean on a freezer?

The FF error code on an LG refrigerator means there’s a freezer fan problem. The issue is most likely triggered by an ice buildup at the fan blades, a failed fan motor, or a problem with the main control board.

How do I fix the ER on my LG refrigerator?

How do I reset my ice maker on my LG refrigerator?

How to Reset LG Ice Maker
  1. First locate the on/off switch of your refrigerator. It usually is on the left side of the unit.
  2. Press the ice on the icon and run a cycle. …
  3. Replace the bin and turn off the breaker for 30 seconds.
  4. Turn the unit back on and let it sit for 6-8 hours before it starts to produce ice.

How many fans does an LG refrigerator have?

2 Answers. This refrigerator has two evaporator fan motors and two evaporators.

What does ER DH mean on LG refrigerator?

Meaning the defrost mechanism fails to reach 46°F within 2 hours to defrost ice in the freezer. { Service technician will need be dispatched.

Where is the reset button on my LG ice maker?

LG Ice Maker Reset

The fill/test button is located on the underside of the tray. Hold the button down until the icemaker turns and runs through a cycle. If the ice maker doesn’t cycle, you will need the bin to be removed.

How do I clean the fan on my LG refrigerator?

Where is the fan located on a LG refrigerator?

How do you replace the fan on an LG freezer?

How do I know if my LG refrigerator compressor is bad?

The compressor itself located the back panel at the bottom of the refrigerator. Disconnect this box and shake it to see if it rattles. If it makes a rattling sound, it is most likely faulty. Also, use a multimeter to check it for continuity.

Why is my LG refrigerator beeping 3 times?

The beeping sound of your LG fridge indicates that something is wrong with the appliance. … Your fridge’s shelves and bottle racks may not be assembled correctly, or the fridge compartments are overstuffed. As a result, the door cannot be closed completely. Your refrigerator’s door seal may be dirty, broken, or damaged.

Why are LG compressors failing?

LG refrigerators contain a compressor defect that allegedly renders the refrigerator unable to keep food contents cold. According to the LG refrigerator class action lawsuit, the compressor failure may be caused by a failure in the ice maker and/or fan.

How do I reset my refrigerator compressor?

How to Reset Your Refrigerator Compressor
  1. Step 1: Move the Refrigerator out from the Wall. …
  2. Step 2: Unplug the Refrigerator. …
  3. Step 3: Shut off the Control Panel. …
  4. Step 4: Plug the Refrigerator Back In. …
  5. Step 5: Reset the Temperature Settings. …
  6. Step 6: Move Your Refrigerator Back into Place. …
  7. Step 7: Wait at Least 24 Hours.

Is it worth replacing compressor on LG refrigerator?

While yes, you can certainly repair a damaged compressor, it may not be worth it. … Most technicians will agree that replacing the whole refrigerator itself may be wiser than repairing or even replacing the compressor. After all, every subsequent repair will make your refrigerator more liable to break.

How do I test the compressor on my LG refrigerator?