Why do cherry pickers stored extended?

Often, they are placed in the basket of the aerial platform overnight. To make sure nobody parks too close to the truck. More space makes it easier to maneuver in the morning.

Why are boom lifts stored up?

To keep people out of them, and it’s pretty difficult to steal a truck when it’s boom is 30 feet in the air. The reason is simple- inside the bucket are the workers tools so we raise the bucket up to prevent theft.

What is the purpose of a cherry picker?

A cherry picker lifts the worker to the proper location quickly and allows them to easily navigate overhead obstacles. Perfect for trimming tall trees in private or public places, a cherry picker enables the worker to reach all areas of the tree that need to be trimmed from the bottom to the very top.

How safe is a cherry picker?

Don’t take risks

Due to the heights involved, a serious fall from a cherry picker may lead to more than just a broken ankle – it can be fatal. You may be tempted to overreach while carrying out your activity from the platform, perhaps while pruning trees, but don’t underestimate for a moment how dangerous this can be.

Can you use a boom lift on a hill?

Like scissor lifts, boom lifts aren’t recommended to use on a hill or incline. The center of gravity is higher with this machine than with many others, which increases the risk for a tip-over. However, it is possible to work on an incline as long as you don’t exceed the maximum slope for the boom lift.

Can a cherry picker fall over?

Safety Tip 1 – Check high and low

The ground must be as level as possible – a cherry picker is not advisable on very uneven ground, because when in use, the extra weight on the platform plus any movement there could cause it to tip over.

What is the smallest cherry picker?

CMC S15 units
Our smallest tracked cherry picker is the compact CMC S15 units are extremely compact, and can navigate gaps as narrow as 78 cm, yet lifts a 200 kg load to a working height of 15 metres at up to 7 metres outreach. The nimble ‘spider’ legs allow it to work on slopes and soft surfaces, or even inside buildings.

Do I need a Licence to operate a cherry picker?

Am I legally allowed to operate a cherry picker? With a standard car driving license, many models can be operated (if they are under 3.5 tons). … If you choose a larger, specialist or HGV cherry picker, you’ll need to hire a fully trained operator in order to operate it.

Do you have to wear a harness in a cherry picker?

The person operating the cherry picker should wear a fall arrest system, usually consisting of; a full-body harness, a lanyard and a suitable anchor point on the cherry picker’s basket.

Do you need to wear a hard hat on a cherry picker?

As well as fall protection equipment, the correct general protective equipment should also be worn. This may include: Hard hat with chin strap. High visibility clothing.

How high can a cherry picker go?

Tele Work Platform – Push Around – 7.6M (25.2ft) Tele Work Platform – Push Around – 11M (36.3ft) Vertical Mast – Push Around – 8.1m – (26.6ft)

Why you shouldn’t wear a harness in a scissor lift?

Other possible hazards with wearing a harness in a scissor lift are giving people a false sense of security and more risk taking behaviour. And if you do fall out, being swung into the side of the machine causing injury.

Do you need harness on scissor lift?

Assuming there’s an adequate guardrail system in place, scissor lift harnesses aren’t required by OSHA, but for all other situations, a personal fall restraint system is mandatory. … Sturdy guardrail systems are generally all that’s needed to keep scissor lift operators from falling off the platform.

At what height do you need to wear a safety harness?

OSHA requires workers to wear a full-body harness, (one part of a Personal Fall Arrest System) when they are working on a suspended scaffold more than 10 feet above the working surface, or when they are working in bucket truck or aerial lift.

Can you use a boom lift as an anchor point?

While some manufacturers allow the boom lift to be used as a fall-arrest anchor while working from the structure, it is never allowable to belt-off to adjacent structures or poles while in the platform.

Do you need training to wear a harness?

It has to be – staff need to be trained on a huge range of risks and restrictions so that they can work on projects at a height safely. … On our Inspection and Safe Use of Harness training course, you’ll get all the theoretical and practical knowledge you need about safety harness use – and all of it in just half a day.

Does OSHA require a harness in a boom lift?

According to OSHA standard, employees must wear “a personal fall arrest or travel restraint system” when working from a boom lift. … This is because there is a significant risk of employees being ejected from these types of lifts.

Can you exit an EWP?

Select the most appropriate EWP for the task. Never enter or leave the platform when it is elevated. Remain within the confines of the work platform at all times.

Can you exit an elevated work platform?

6.Do not exit an elevated boom or scissor lift platform unless properly trained to do so, maintain 100 percent tie-off at all times.

Can you exit a MEWP at height?

MEWPs are not designed to transfer people from one level to another, or for people to exit the platform at height. People should only enter or exit the work platform at access positions at ground level or on the MEWP chassis.

Is a scissor lift an EWP?

Scissor/Vertical Lifts and Truck/Trailer mounted EWP’s

To confuse matters, a Scissor Lift is not defined as a boom type EWP (ie does not have the capacity to slew). … HRWS offers nationally recognised training in Scissor Lifts, Vertical Mast Lifts or Trailer/Truck Mounted EWP’s dependent on your specific requirements.

Can you use a scissor lift to get on a roof?

Roofing jobs require a lot of workers, materials and equipment. In this situation, using a roofing scissor lift truck is the best choice every time. Scissor lifts only go up and down, which is all you need with most roof jobs. They have large platforms that can lift workers and equipment at the same time.

Can anyone operate a scissor lift?

Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.

Do you have to wear a harness in an EWP?

This is a clear indication that providing the EWP is used and maintained as per the manufacturer’s recommendations, there is no requirement for a harness to be worn. The platform guard and hand rails are the primary source of fall protection for operators.

What is a EWP yellow card?

The Yellow Card Training Program has been designed for people needing to develop the skills and knowledge required to operate Mobile Elevating Work Platforms (MEWPs or commonly known as EWPs).