Why won’t my Bluetooth mouse connect to my Mac?

Assuming the new batteries are charged, the most likely explanation is that you need to reconnect your mouse to your Mac. Head to System Preferences > Bluetooth, and toggle Bluetooth off and on again. If it still doesn’t work, try unpairing and pairing your wireless mouse with macOS.

How do I connect my wireless mouse to my Mac without a mouse?

  1. fn + control + f8 (this hi-lights the functions in the top right hand corner of your screen)
  2. use right or left arrow keys to navigate to the bluetooth icon.
  3. arrow down to your mouse.

How do I reconnect my Bluetooth mouse to my imac?

How do I reconnect my mouse to my Mac?

How do I get my Mac to recognize my wireless mouse?

How to connect a wireless mouse to a Mac
  1. Turn the mouse on, and make sure it’s within range of your Mac. …
  2. Click the Apple icon in the top-left corner of the screen.
  3. Select “System Preferences…”
  4. Click the “Bluetooth” icon.
  5. If it’s not already on, select “Turn Bluetooth On.”
  6. Wait for your mouse to appear on the list.

How do I open Bluetooth on Mac without mouse?

Simply follow these steps:
  1. Hold the Command (⌘) key then press the spacebar to open Spotlight Search.
  2. Type Bluetooth then use your keyboard’s arrow keys to highlight Bluetooth File Exchange.
  3. Press the enter or return key to open it.
  4. Your Mac will recognize Bluetooth is disabled and ask if you want to reenable it.

How do I make my wireless mouse discoverable?

Press and hold the ‘Pairing’ button on your mouse.

Most Bluetooth mouses have a pairing button that you must press and hold for a second to make the mouse discoverable via Bluetooth. Typically, a light will flash when the mouse is in pairing mode.

Why is my Mac not finding my mouse?

When a Mac computer doesn’t recognize a mouse, first check the USB port or its batteries. … Most of the time these involve a USB mouse plugged into a bad USB port or a wireless mouse running out of batteries. Other times the mouse needs to be replaced.

How do I add a Bluetooth mouse to my macbook air?

Connecting a Wireless Mouse
  1. Open System Preferences from the Dock and click the Bluetooth button. Turn Bluetooth On.
  2. Click the Set Up a New Device button.
  3. Power on the mouse and hold it a few inches from your Mac. …
  4. When your mouse appears in the list, click Continue to finish the pairing process.

Why is Bluetooth mouse not working?

Battery: A wireless mouse requires batteries to power its communication with your computer, whether it’s using Bluetooth or USB connectivity. Check to be sure the batteries are inserted correctly, and that they’re not simply worn out. Fresh batteries are the cure for many wireless mouse problems.

Why is my wireless mouse not connecting?

Sometimes the receiver gets out of sync with the wireless devices, causing them to stop working. Resyncing the setup is fairly easy. There is usually a Connect button somewhere on the USB receiver. … Then press the Connect button on the keyboard and/or mouse and the flashing light on the USB receiver should stop.

How do I connect my Mac mouse to my Macbook?

Can I use any Bluetooth mouse with MacBook?

In the past, finding accessories for your Mac could be a challenge; now, almost every mouse will work with Apple devices, at least partially.

How do I reset my Bluetooth mouse?

To reset a wireless mouse:
  1. Turn off your wireless mouse.
  2. Hold down the left and right mouse buttons.
  3. While holding down the mouse buttons, turn the mouse back on.
  4. After around 5 seconds, release the buttons. You will see an LED flash if it resets successfully.

Can you use any mouse with a MacBook?

To be totally honest, mice are generally platform-agnostic devices. Pretty much any USB, wireless, or Bluetooth mouse will work on both PCs and Macs. That, of course, doesn’t stop savvy marketers from designing products with an Apple-inspired look and feel.

How do I connect my Logitech wireless mouse to my Mac?

On the device
  1. Open System Preferences and click Bluetooth.
  2. In the Devices list, select MX Anywhere 2 and click Pair.
  3. Follow the onscreen instructions to complete the pairing. Upon pairing, the selected channel number light on the mouse stops blinking and remains steady for 5 seconds.