What do I do after Meguiars Ultimate Compound?

Just follow up with any light polish such as Ultimate Polish or M205. If using ultimate polish remember to wipe or wash away all the oils left behind to see the true condition of the paint.

Do you let Meguiars Ultimate Compound dry?

If by curing you mean to dry, Meguiar’s Ultimate Compound should not dry. You do not want it to dry. Apply it, work it into the finish to remove the swirls and then wipe it off before it dries.

Do I need to wax after Meguiars Ultimate Compound?

Do I Need To Wax After Meguiar’s Ultimate Compound? Nope! … The wax in the product will mask deep scratches that cannot be removed and will protect the surface until the next car detailing. It also has oils that further protect the surface of your car and give it a shiny, water-resistant finish.

Can I use Meguiars Ultimate Compound by hand?

Meguiar’S Ultimate Compound Scratch Can Be Used By Hand Or Machine 15.2 Oz.

Is Meguiars Ultimate Compound a rubbing compound?

Meguiars Ultimate Compound will become your go-to rubbing compound! Apply it by hand or dual action polisher, to any type of paint, to enjoy smooth results in one step.

Will Meguiars Ultimate Compound remove clear coat?

The Meguiars Ultimate Compound is one of the most popular cutting compound products. It has a high abrasive quality, but still not harsh enough to remove the clear coat. Compounds also come in the form of polishers. If your car coat has very small scratch and swirl marks, you need a polisher compound.

Do you have to wax after compound?

TIP: You should always follow a polishing compound treatment with car polish or car wax to refine the shine and to protect the paint.

How do you apply Meguiars Ultimate polish by hand?

Does Ultimate Compound remove scratches?

Meguiar’s Ultimate Compound is the ultimate paint cleaner for removing below surface defects such as light to moderate oxidation, scratches, water spots and stains.

Can you wax over compound?

A compound agent is a liquid that is applied with a buffing or polishing machine. It acts like sandpaper to gradually remove surface layers and eliminate scratches. After compounding, polish is used to remove any remaining defects. … Once the painted surface has been smoothed and polished, it can be waxed.

What Pad do I use with Meguiars Ultimate Compound?

If you want to keep it simple, use an ORANGE pad (light cutting) for Ultimate Compound and a WHITE pad (polishing) for the Ultimate Polish. A Blue pad (finishing) will be a perfect match for the Ultimate Wax (paste or liquid).

What do you put after compound?

The experts at Turtle Wax advice that applying a wax coating to your car after using such a compound can restore shine and also seal and protect your car against future damage. Park your vehicle in a shady area where it is shielded from direct sunlight.

Do you wash car after compound?

Once you apply the compound to the entire body of the car, rinse the car’s exterior with clean water and dry the surface thoroughly.

Do you have to clay before compounding?

Yes, you will want to clay and perhaps decontaminate the paint with something like Car Pro Iron X before compounding. Main reason is you want to compound and polish paint that’s free of any contaminants for obvious reasons.

Do I need to polish after rubbing compound?

Thus, the polishing compounds are used after the use of the rubbing compound on the paint. Other than this, the polishing compound cannot alone protect the paint for a long time. … You may have to use paint protectant for making your car’s paint stay shinier for a long time.

How long do you leave compound on a car?

Rub the compound into the surface of your car until it is invisible.
  1. With moderate force, your rubbing compound should disappear in 1-2 minutes, on average.
  2. Check to make sure all spots are shiny and beautiful when you are finished. You can go back over any areas you missed at this time.

How often should I compound my car?

Use polishing compound only when needed. This should be once or twice in the lifetime of the car.

Can polishing compound remove scratches?

FINISHING STEPS

Buffing an area with polishing or rubbing compounds removes scratches and blemishes, but they also remove wax. … Your preferred wax method will restore shine and protect the paint.

What speed should I compound a car?

Try to stay between 1750-2400 RPM when compounding and between 1200-1750 RPM when finishing. After using compound wash the treated area with soap and water to eliminate excess compound grit. When finishing with a polish or glaze, don’t buff dry.

How do I make my car shine like glass?

How do I get rid of scratches on my car?

What RPM is best for polishing car?

The best RPM for buffing depends on how much you’re cutting and the type of pad you’re using. Generally, with wool pads, you would do your heavier cutting at around 2000-2500 RPM, while you’d want to finish at around 1100-1300 RPM for final foam polishing.

What speed is best for polishing?

However, we recommend using 1500 to 1800rpm (number 3 on a variable speed polisher) to get the optimum speed to create the perfect finish for your bodywork, unless otherwise stated on the label. It is best to start slow and then increase the machine speed to finish the polishing process.

Can you compound with a DA?

DA Compound Power Pads

Compounding has never been easier! Paired with Ultimate Compound, quickly removes oxidation, scratches, swirls, water spots, and other paint defects with ease.