How do I setup my CenturyLink modem?

Open a web browser and type http://192.168.0.1 into the web address field. 3. Log in to the modem’s settings interface (Modem GUI) using your Admin Username and Admin Password. Note that these are different from your wireless network name (SSID) and WiFi password (security key).

How do I connect my CenturyLink modem to my router?

Configure the Modem
  1. Before you get started, obtain your PPPoE username and password from CenturyLink. …
  2. Connect to your modem via ethernet. …
  3. Go to 192.168. …
  4. Log in to your modem with the CenturyLink login credentials on the bottom.

How do I reset my CenturyLink wireless router?

  1. Locate the Reset Button. Look for the factory reset button on the back of your modem or router—it’s likely red. …
  2. Use the Reset Button. To initiate the factory reset, press and hold the button for at least 15 seconds. …
  3. Wait. Wait for at least 3-5 minutes for the factory reset to finish.

How do I activate my modem?

Connect the coaxial cable from the cable outlet on the wall to the back of your modem. Plug the power cord into the power port on the back of your modem and the other end into an electrical outlet that is not connected to a switch. Result: The modem lights start to flash and light up.

Is CenturyLink a DSL or cable?

CenturyLink uses both DSL (digital subscriber line) and fiber optic internet. The combination means it is widely available, offered in 36 states. DSL is an older technology and isn’t as fast as cable or fiber, but it’s a better option than dial-up and much more affordable than satellite.

How do I connect my modem to the Internet?

Connect the modem power cord into an electrical outlet, then connect the other end to the modem. Connect one end of one Ethernet cable into the back of the modem, then connect the other end into the Wide Area Network (WAN) port on the router.

How does CenturyLink Internet work without a phone line?

CenturyLink offers High-Speed Internet services that do not require a home phone line. Depending on location, the connection speeds available may vary. CenturyLink does offer bundled services for customers who want additional benefits or to save on their monthly bill.

How do I setup my modem and router?

Why is my modem not connecting to the Internet?

Your router or modem may be out of date, your DNS cache or IP address may be experiencing a glitch, or your internet service provider could be experiencing outages in your area. The problem could be as simple as a faulty Ethernet cable.

Do you need a modem to connect to the Internet?

You’ll need a modem and an ISP to access the internet. You may be able to connect your computer or game console directly to the modem with an Ethernet cable, but you’ll need a router to connect wirelessly. There are also modem-router combination units, which are essentially modems with built-in routers.

How do I setup my NBN modem?

Changing nbn modem settings
  1. Log on to your Belong Wi-Fi (you don’t need to be connected to the internet to do this)
  2. Open an internet browser (e.g. Internet Explorer, Safari or Chrome)
  3. Type 10.0.0.138 into the address bar.
  4. If prompted, type in your modem username and password: Enter the username ‘admin’

What lights should be on my modem?

The power light, downstream indicator, upstream indicator, online indicator, and link light on your modem should all be green. If your power light is yellow, it may be upgrading, so leave the modem on and give it a little time to do its thing.

How do you tell if your modem or router is the problem?

5 Warning Signs Your Cable Modem is Dying
  1. Connection indicator lights have turned off even if you can still surf the web.
  2. Data transfers/downloads are slow.
  3. The connection speeds are slow.
  4. The modem is making a lot of loud or weird noises.
  5. The modem turns off or stops functioning.

Why is my modem not connecting to my router?

the first thing you’ll want to do is try and restart your router. … It is quick and easy to reboot your router. Usually, you just unplug the power cable, give it a couple of seconds, and then plug it back in. If your modem is separate, you might also want to do the same with your modem’s power source.

How do I know if my modem is working properly?

Check the lights on your modem. The lights on the side of your modem can tell you whether or not your modem is connected to your router and the internet. If none of the lights on your modem are glowing, then your modem isn’t turn on, so you should check the power cable.

Should the lights on my modem be flashing?

If the light is on, a self-test of the modem has failed. If the light is blinking, a self-test or software download is in progress. If the light is off, either the self-test was successful or the modem is off.

Should my modem lights be blinking?

A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). … A blinking red light indicates a possible modem failure.