What does 1000 feet of copper wire weigh?

A 0000 gauge wire will weigh 640.5005 lbs per 1000 feet while a 40 gauge wire will weigh 0.0299 lbs per 1000 feet Standard copper wire weight information can be found in the following chart.

How do I calculate the weight of a wire?

Because its cross-sectional area is machined to such precision, calculating a wire’s weight is as simple as multiplying the cross section by the length by the density of the material.

How do you calculate the weight of copper in a cable?

The copper weight is calculated by the cross section of a cable x 9.6 and will be shown in kg / km. For example FLRY 1.50 mm² has a copper weight of 14.4 kg / km (9.6 x 1.5).

What is 4 0 wire rated?

Related Resources
Size Temperature Rating of Copper Conductor
(AWG or kcmil) 60°C (140°F) 75°C (167°F)
2/0 AWG 145 175
3/0 AWG 165 200
4/0 AWG 195 230

What does 1 0 copper wire weigh?

Bare Copper Wire Data
AWG B&S Gauge Diameter (mils) Weight per 1000 ft. (lbs.)
0 324 318
1 289 256
2 257 200
3 229 159

How many feet of copper wire are in a pound?

50.59 feet
For example, 50.59 feet of 12-gauge wire weighs one pound, and 80.44 feet of 14-gauge wire weighs one pound of bright #1 copper after it is stripped.

How many amps will #4 copper wire carry?

Wire Size and Amp Ratings
Wire Size 75°C (167°F)
AWG (mm²) Copper
6 (13.3) 65
4 (21.2) 85
3 (26.7) 100

How many amps can 4 0 cable handle?

310 Amps
4/0 Welding Cable carries 310 Amps for 600 volt in-line applications. 4/0 Welding Cable is an extremely flexible cable with pure fine stranded copper. It contains an abrasion-resistant rubber EPDM jacket.

How many amps is #4 wire good for?

85 amps
How many amps can a 4 gauge wire handle? It has a rated ampacity of 85 amps at 75°C. This means that, for average use, the 4 gauge wire can handle up to 85 amps safely.

What is the difference between 4 0 and 4 AWG?

This can be very complex but I will try to simplify #4 awg wire is quite a bit smaller than 4/0 wire. The difference is in the size, (circular Mils) and the amount of current that the wire is able to safely carry.

What size wire do I need to run 150 feet?

150 Foot Run – A 120-volt circuit on a 20 amp breaker will require 6/2 AWG wire for 150 feet.

What size copper wire is good for 300 amps?

300 amp. For 300 amp service, you will want copper wire of size 500 kcmil to handle the load.

What is #4 copper wire?

4 AWG THHN/THWN-2 Specifications*:
Cable Type THHN/THWN-2
Conductor Material Bare Copper
Stranded or Solid Stranded
Number of Strands 19
O.D. (Inches) 0.318

What wire do you use for a 200 amp service?

Installation of 200 amp electrical service needs a #2/0 AWG copper wire or #4/0 AWG for aluminum or copper-clad wire inside a minimum of 1.5 inches, schedule 40 or 80 PVC conduit for underground service. However, 2 or 2.5 inches is recommended if running 3 wires in the same conduit.

What size ground do I need for a 200 amp service?

Per Article 250 of the NEC , The minimum size for a grounding conductor for a circuit protected by a 200 amp breaker is #6 copper or #4 Aluminum.

How much does #4 Thhn weigh?

Weight per 1,000 ft: 710 lbs. Outside Diameter: 0.660 inches. Conductors: Annealed Soft Copper per ASTM B3 and ASTM B8.

What is 4 AWG wire used for?

This wire is 4 AWG, good for 95 Amp when used in conduit with less than 3 conductors. This wire is rated for use in dry or wet locations, raceways, or conduit. It can be used outside exposed to the weather as well, though the insulation is not 100% UV-proof and installation in conduit is recommended.

Is Number 4 copper good for a hundred amps?

A 100 amp sub panel wiring size requirement is #4 for copper wires and #2 for aluminum wires.

How much does 750 MCM copper weigh?

Specifications: Size AWG: 750. Weight per 1,000 ft: 2480 lbs. Outside Diameter: 1.170 inches.

What does 350 MCM copper weigh?

1165 lbs
Specifications: Size AWG: 350. Weight per 1,000 ft: 1165 lbs. Outside Diameter: 0.830 inches.