What size tire is P205 55R16?

205/55R16 tires are 24.9″ tall, have a section width of 8.1″, and fit wheels with a diameter of 16. The circumference is 78.1″ that translates into 811 revolutions per mile.
…
What is 205/55R16 in inches?
Tire Diameter: 24.9″
Sidewall Height: 4.4″
Circumference: 78.1″
Revs/Mile: 811
•
Oct 8, 2021

What does R16 mean?

The number to the right of the construction type is the rim diameter, measured in inches. In this case, it’s a 16” wheel.

Can I use 205 55R16 instead of P205 55R16?

Yes. It will have a slightly lower sidewall height, but should work fine.

What does the 55 stand for in P205 55R16 89H?

P205/ 55 R16 89H – Aspect Ratio

The aspect ratio tells you the height of the sidewall. It is expressed as a percentage of the tire’s width.

What does 55 R mean on a tire?

In our example, the 55 means that the sidewall height is 55% of the 205-mm tread width. Construction. The letter following the profile height identifies the tire’s construction. Most tires sold today are an R, which means they are of radial tire construction.

What does the R stand for on tire?

radial construction
R indicates the construction used within the tires casing. R stands for radial construction. B means belted bias and D stands for diagonal bias construction. … Each letter coincides to the maximum speed a tire can sustain under its recommended load capacity.

What does 205 stand for in P205 55R16 91H?

“205″ specifies the tyre’s nominal width in millimetres. The number “55″ refers to the nominal aspect ratio, i.e. the ratio of the tyre’s height to its width. In this case, the height of the sidewall is 55 percent of the nominal width.

What is the difference between 205 55R16 and 205 60r16?

The wheel radius is exactly the same, only the profile slightly different. The radius will be very slightly different. 205/55 will have a total radius of 519.15mm, while 205/60 will have a total radius of 529.4mm, so about 2% difference.

What is the meaning of P205?

Definition. P2O5. Phosphorus Pentoxide (chemistry)

What is 91V and 91H?

It indicates the maximum speed of the tyre. V tyres have a top speed of approximately 149 mph (240 km/h) and H tyres, approximately 130 mph (210 km/h).

What does 91T on a tire mean?

Load bearing index
The 91H and 91T refer to the tire Load bearing index and speed rating of the tire. (Load Index 91 refers to 1356 Pounds or 615 Kilograms). … The H and T refer to the speed rating of the tire. Max Speed for T is 118 mph or 190 km/h (For Family Sedans & Vans) Max Speed for H is 130 mph or 210 km/h (Sport Sedans & Coupes).

What does 91V stand for on a tire?

Speed rating

The rating system uses letters from A to Z. Here, you can see that a tire with a 91V mark can them run at a maximum speed of 149 mph while carrying 615 kilograms or 1,356 pounds load. What does ZR in tire size mean? ZR or Z-rated markings mean the tires can go over 149 mph in speed.

What does 113 110s mean on a tire?

113 is the load rating, it means the tires can handle up to 2535 lbs. S is the speed index, which means the tires can go up to a speed of 112 mph.

What is the 91y on tire?

Y speed rating

Y speed rated tires have been tested at speeds up to, and in excess of, 186 mph (300 km/h) under optimal conditions. If Y speed rating is indicated without parentheses (as normal), this means the tire is rated up to 186 mph.

What speed rating is H?

130 mph
SPEED RATING H

If you recall from earlier, the “H” speed rating doesn’t appear after “G” but between “U” and “V.” It represents a maximum speed of 130 mph (210 kph) and is commonly found on sports sedans and coupes.

What does 120R mean on a tire?

The “123/120R” is the tire load rating in this section. … The first rating of 123 means that if the tire was the only tire on that side, it could haul up to 3417lbs. If one tire was to fail, the single tire would be able to support the load of the vehicle.

What does tire size mean P275 55R20?

The same 2014 Ford F150 in their Platinum Series comes with a tire size of P275/55R20. The tire is a (P) passenger tire, with a tread width of 275 millimeters, the sidewall is 55% as tall as the tread (section width) is wide, and the wheel diameter is 20 inches.

What does 100T mean on a tire?

Just after the tire size are some more numbers, commonly 100T. The 100 is the tire’s load index, and in the case of 100, it means by itself a properly inflated tire can hold up 800 kilograms (1,764 lb.).

What does 125 R mean on a tire?

The first number indicates the tire’s diameter in inches (in this case, 35 inches tall). The next number (12.50) is the width, and the “R” that follows indicates that this is a radial tire.

What load range is SL?

SL stands for Standard Load and XL indicates extra load. An SL-rated tire has its maximum load capacity at an inflation pressure of 35 psi. XL tires can carry a heavier load when inflated to 41 psi.

What does Load Index 100 mean on tires?

The higher the tire’s load index number, the greater its load carrying capacity. Choosing a tire with a lower load index than the original equipment specifications means that the tire will not carry the load capacity of the original. Most passenger-car tire load indexes range from 75 to 100, but some are higher.

What ply is load range E1?

10
For example, a “C” load range indicates that a tire is equivalent to a 6-ply construction tire. This tire isn’t actually built with 6 plies, but rather one or two plies of equivalent strength.
…
Load Range and Ply Rating
E1 10 @ 80 PSI
E2 10 @ 65 PSI
F1 12 @ 95 PSI
G 14 @ 110 PSI

What does 122p mean on a tire?

The second number (122) refers to the load rating on a single tire used in a dual rear wheel application. “Q” refers to the tire’s speed rating. In this case, the tire is rated at 99 mph for continuous use. The higher the letter, the faster the tire is rated to travel.

Is a higher load rating better?

NO. Higher Load Index will only help you in carrying extra load. For a smoother ride on rough roads, drive carefully and keep the recommended inflation pressure.

What load range is 10 ply?

E
For example, an “E” load range indicates that a tire is equivalent to a 10-ply construction tire.