What size bar is on a Husqvarna 55 rancher?

Cutting Gear

According to the Husqvarna 55 Rancher User’s Manual, retrieved from Lawn and Garden Manuals Online, the 55 Rancher comes equipped with a standard 15-inch bar length (recommended length is from 13 to 24 inches).

What is the difference between a Husqvarna 55 and 55 rancher?

One way to determine which type Husqvarna 55 you have is the decompression valve. The 55 has a deco valve. The 55 Rancher does not have a deco valve.

How do I identify my Husqvarna chain?

Chain identification

Husqvarna saw chains carry the model number on the drive link. Husqvarna saw chains have the model number stamped on the drive links (see image above).

How do I know my chainsaw chain size?

To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch.

Is the Husqvarna 55 a pro saw?

An untrained operator can dull a chain in one cut. The Husky 55 is a good medium size saw for medium duty use.

Is Husqvarna 359 a pro saw?

While the Husqvarna 359 is not technically a pro-level saw, it is one of the top non-commercial saws. It’s perfect for home and farm use and can be used heavily. The saw will run happily for many hours a day.

What does 72 mean on a chainsaw chain?

3/8 pitch
72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.

What size chain do I need?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

What is the difference between .325 and 3/8 chain?

325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 ” chain has more cutters in .

What’s the difference between 404 and 3/8 chain?

Secondly, the numbers 3/8″ and . 404″ refer to the pitch (distance) between the drive links – these are the bits on the chain that stick down and engage with the drive sprocket on the saw, and the sprocket on the roller-nose end of the bar.

What do the numbers mean on a Husqvarna chainsaw?

The first digit in a Husqvarna chainsaw model number refers to the generation or series. There are currently 5 generations of Husqvarna saws: 1,2,3,4,5. For example, the 4 in the Husqvarna 450 means it’s a 4th generation Husky chainsaw. … The second and third digits, following the series number, refer to the engine CCs.

What chainsaw chain cuts the fastest?

full chisel chain
A full chisel chain is a chain with square cornered teeth, and they’re known for being the fastest cutting blade shape available. A full chisel chain also has a higher number of teeth than other chain options(full chisel is also known as a standard chisel chain).

What size is 404 chainsaw chain?

404 has . 063 drive links. . 375 uses . 050 or .

What is a 3/8 chainsaw chain?

3/8″ low-profile chains typically fit chainsaws whose guide bars are 18″ or shorter in length, which are the majority of medium-use, non-professional application chainsaws such as a homeowner might own. .

What is a 404 chainsaw chain?

404″ Pitch Harvester Bars & Chains

404″ Pitch Cutting System for its rugged endurance and unmatched ability to keep up with the extreme torque and RPM’s generated on modern equipment.

What size file do I need for a .325 chain?

File sizes
Chain pitch Round file diameter
1/4″ 4.0mm
.325 4.8mm
3/8″ 5.2mm
.404 5.5mm

How do you operate a chainsaw chain?

What is Harvester chain?

Harvester Restaurants is a family “farmhouse style” restaurant chain with over 230 outlets (as of December 2015) in the United Kingdom.

How do you put a chain on a Husqvarna chainsaw?

Why does my chainsaw chain get dull so fast?

With a single contact with the ground while running, a chainsaw can become very dull. This is because the ground contains sand and dust which is abrasive and contains a lot of tiny rocks. To avoid such occurrences, avoid cutting wood placed on the ground.

How tight should a chain be on a chainsaw?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.