It can be a challenge moving your waterbed from one to place to another when it is filled with water. You must drain your waterbed for easy relocation. Draining your water bed needs appropriate measures to ensure the process is successful. We have provided you with simple guidelines to enable you drain your waterbed with ease.

How to Drain a Waterbed without a Pump

  • Get to the location of your waterbed and remove all the bedding. You obviously do not want to wet or mess up with your bedding.
  • Unplug the power socket connected to your waterbed. It can be catastrophic to drain your waterbed while it is still connected to the power supply. To be on a safer side, disconnect any power cables that might be powering some aspects of your bed.
  • Take a closer look at your water bed and locate the drain plug. In most cases the plug is located at the foot of your waterbed. In rare cases, you may find the drain and fill valve at the center or towards either side of the waterbed.
  • After you find the valve, remove the cap. Using a light object press your waterbed from one side towards the location of the valve. The idea here is not to drain water but to remove any air inside the water bed. Make sure you remove this air as possible as you can. This is because this air may complicate or otherwise slower the process of draining water from your waterbed.
  • Once you are done, place the cap and make you close the valve tightly. This makes sure no air gets in plus no water spills out of the water bed.
  • Take your garden hose and route it from your waterbed to a place that is quite convenient with you. Ensure it is a place where you can drain water freely without causing flooding problems.
  • Connect one end of the garden hose pipe to the waterbed using hose connecter to the drain and fill valve. You can place weight materials around the valve to ensure that plug sits slightly lower compared to the rest of the mattress.
  • To siphon water from the waterbed, you can connect the hose pipe to a faucet outside your house.
  • Turn the water on for at least 10-15 minutes. This creates a continuous siphoning effect since air inside the garden hose is pushed to the waterbed.
  • After creation of the the siphoning effect, you can turn off the water and remove the garden hose from the faucet.
  • Drop the garden hose to the ground and let the process begin in earnest. You must have heard what gravity does? Well, in this case at all times ensure that the hose is lower than the water bed. In case you find out that the method is not effective you can try siphoning water using your mouth. It is also a recommended method of pulling water from the water bed.
  • After the process nears conclusion, you can use slightly heavy objects that won’t damage your mattress to squeeze all the water from your waterbed.
  • Once you are completely satisfied that no water is inside your waterbed, go ahead and remove the garden hose from the drain and fill plug. Immediately place the cap plug. This prevents air entry into the the already drained mattress.
  • Relocate your mattress in peace.

Tips: If your bed is located at the basement, you will agree with us that it is completely impossible for you to place the garden hose lower than the bed as we put it in our guidelines. However, there is no cause to worry. If that’s the case, kindly use dry wet vacuum to remove all the water from your bed.

How do you drain a waterbed with a drain kit?

Using a drain and fill kit, which is available at any local waterbed store. Remove the faucet aerator and attach the faucet adapter to a sink. Next, attach the Venturi Pump to the faucet adapter. Turn the bell-shaped bottom piece of the Venturi Pump to the marked drain position.

How long does it take to drain a waterbed?

Gravity Helps

A pump can speed the process up, especially if the drain hose isn’t getting much help from gravity. With a pump, a king-size waterbed takes just under an hour to drain, usually around 50 minutes.

Can you drain a waveless waterbed?

When the time comes to drain a semi waveless waterbed, the process is actually quite similar to draining a free flow waterbed but takes a little more time and effort to finish the job because the water also needs to be removed from the baffles to be able to move the mattress.

Do you change the water in a waterbed?

Unless you are moving your water mattress, there is no need to change the water. However, you will need to continue to add waterbed conditioner once every year.

Why waterbeds are not made anymore?

We like hippies, but the waterbed industry hippies were apparently not in the right frame of mind to make good business decisions.) The public bought in to the idea of “flotation sleep” and often put up with inconvenience and sometimes poor quality, all to get that warm, wonderful sleep provided by natural water.

Do waterbeds get moldy?

Sometimes mold begins to grow on the exterior surface of a waterbed mattress when there is a leak in the mattress. A small leak may go unnoticed for a while, but the warmth and moisture makes a perfect environment for mold. Inspect your waterbed liner for mold, as well.

Is it good to sleep on a waterbed?

Stomach sleepers also get better support from a waterbed mattress than from a regular foam or innerspring mattress. The support provided by a waterbed helps to prevent joint pain, pain in the neck area and lower back pain.

Do they still make Waterbeds in 2020?

Do They Still Make Waterbeds? Yes, it turns out there are still some sleep manufacturers producing and selling waterbeds. They‘re not nearly as popular or common as they were in their hay day, but they‘ve still got a presence.

Has anyone died from a waterbed?

There were 2 modes of death associated with waterbeds. In 68 deaths (86%), the cause of death was listed as airway obstruction. The infants were found in the prone position, face down on the soft, nonpermeable surface of the waterbed, and death was apparently caused by airway obstruction.

Does anyone still sell waterbeds?

Today, waterbeds make up only a very small fraction of overall bed and mattress sales. Many home furnishing retailers won’t sell them, and some that do say it’s been years since they last closed a deal. William Hooper of Portsmouth, England patented a therapeutic rubber mattress that could be filled with water.

Are waterbeds making a comeback?

But after an overhaul, it’s coming back for another round. Hall and his original business partner, Michael Geraghty, have recently introduced a new version of the waterbed, dubbed Afloat. And this time around, you don’t need to buy special waterbed sheets — any standard bed linens fit.

Are waterbeds bad for you?

First up, waterbeds are bad for you back. The problem is that they do not shape themselves to your body in the same way as other superior mattress materials do. Rather, what they do is force the body to conform to the mattress’s shape. Often people on waterbeds will wake up with numb limbs in the morning.

Do waterbeds have a weight limit?

Waterbed mattresses, depending on the size, hold about 80 to 235 gallons of water, which could bring the weight of the entire bed to over 2,000 pounds. This weight could pose a risk to the floor the bed is on.

Does water in a waterbed evaporate?

A waterbed does this naturally when properly filled and offers the best support for your back. Water, H2O, contains Hydrogen and Oxygen, the heater evaporates the water, creating air bubbles. When the air bubbles are released the volume capacity of the bladder is lowered.

Can you put fish in a waterbed?

The James Bond Aquarium Waterbed. There’s just no way to safely get fish inside of your water bed without having to replace them every few days as they die off.

How much weight can you put on a waterbed?

A waterbed can weigh up to 1500 lbs, but because the weight is distributed over a large area, weight is not a concern. A waterbed weighs less per square foot than a refrigerator. Any house built to modern building codes can handle the weight of a waterbed without a problem.