How do you mix Brushtox per gallon?

After a little experimentation I have discovered that one tablespoon per gallon of water is the best killing ratio for kudzu. I also mixed in 5oz of round up for the suffocant I have tried one tablespoon to two gallons ,but it took much longer to eliminate the leaves. Some of the things I sprayed wilted within hours.

How much Brushtox is in a gallon of water?

He told me 6 ounces per gallon of water.

What oil do you mix with Brushtox?

I mixed this at 4 oz./gallon of water with Methylated Seed Oil and sprayed about a quarter acre of shoots that sprang up after cutting some mature trees.

How do you use Brushtox brush killer?

How much water do you mix with Brushtox?

Aerial Application: Use oil and water in the spray mixture in a 1:5 ratio (1 part oil to 5 parts water), up to a maximum of 1 gallon of oil per acre according to mixing instructions below.

How long does it take Brushtox to work?

This herbicide is great! Works on brush-like plants within… This herbicide is great! Works on brush-like plants within 24 hrs.

How do you mix triclopyr?

The mix rate for Triclopyr 4 varies depending on the application method and target plant. For spot treatments to ornamental turf, Mix 3/8 (0.375 oz.) to 3/4 (0.75) fluid ounces of Alligare Triclopyr 4 per 1000 square feet in 1 to 2 gallons of water. For more specific application rates please refer to the label.

What is the mix ratio for triclopyr 4?

The mix rate for triclopyr is 3.2oz to 6.4oz per gallon.

Is triclopyr stronger than glyphosate?

The herbicidal activity of triclopyr is more rapid than that of glyphosate. Herbaceous plants sprayed with triclopyr may show injury symptoms within 24 hours and usually die in a few days. Triclopyr is most effective when applied to actively growing plants. … Triclopyr has low to moderate toxicity to humans and wildlife.

Can triclopyr 4 be mixed with water?

Apply Alligare Triclopyr 4 foliarly by diluting with water or as an oil-water emulsion . NOTE: An oil-water emulsion performs more dependably under a broader range of conditions than a straight water dilution for woody plant control and is recommended for aerial applications .

Can you mix glyphosate and triclopyr?

A mixture of glyphosate plus triclopyr is a useful standard mix for managing most vegetation targets. It has broad activity, and low risk to non-targets, and is economical both in terms of per-acre cost and container size, for the commercial applicator or the individual landowner.

How long does triclopyr last soil?

The reported half-life of triclopyr in soils varies from 3.7 to 314 days, but averages 30 days, depending on the formulation applied and the specific soil and environmental conditions.

How long does triclopyr need before rain?

Answer: Hi-Yield Triclopyr Ester can withstand rain 1 hour after application.

What is the difference between triclopyr 3 and 4?

Both Garlon 3A and Garlon 4 Ultra are formulations of the active ingredient, triclopyr. Garlon 4 Ultra is a 4 pound acid equivalent per gallon (lb ae/gal) low volatile ester in a plant based oil carrier, whereas Garlon 3A is a 3 lb ae/gal water soluble amine in water.

How do you mix triclopyr 4 with diesel?

You mix this product anywhere from 1/2 ounce to 3 ounces per gallon of water or diesel fuel for control of broadleaf weeds and brush.

Can triclopyr be used near water?

Triclopyr needs to be applied to plants that are actively growing. A water body should not be treated with triclopyr if there is an outlet, or in moving waters such as rivers or streams. If there is water movement at a treated site, higher concentrations or a repeated application may be required.

Can you plant after using triclopyr?

The active ingredients are glyphosate and triclopyr. One day after use, ornamentals can be planted and lawns reseeded seven days after treatment. Trees that do not bear cones can be planted after 14 days, and cone-bearing trees and shrubs should be planted 30 days after last treatment.

How often can you apply triclopyr?

every 3-4 weeks
of product per gallon of water. You will likely have to do multiple applications to gain full control of the Bermuda grass. Applications can be done every 3-4 weeks.