【How-to】Can you cut a shower surround for a window

Can I cut a tub surround for a window?

Make sure that the measurements of the new tub surround will not interfere with the window. If you do have a window in the area, you will have to pick thin panels that are relatively easy to cut and trim around a window.

How do you cut a fiberglass tub surround window?

Can you cut fiberglass shower surround?

Fiberglass shower liners are generally thin pieces of fiberglass paneling that you glue onto a shower stall wall. … Fiberglass may chip if cut with the wrong blade, so use a carbide tipped plywood-type multi-tooth cutting blade for the cleanest cut.

How do you cut a shower enclosure?

Can shower wall panels be cut?

Shower wall panels are super easy to install by anyone who is DIY competent. Simply cut the Showerwall panels to size and fix them to the wall or over existing tiles.

How do you trim a shower window?

What can I put above my shower surround?

Any sort of artwork that won’t be damaged by humidity can be hung above the shower surround to create an inviting atmosphere. For example, hand-painted tiles can be hung individually by attaching picture hangers to the back with epoxy-based glue, or by using small plate hangers.

Can you use wood trim in a shower?

The short answer is, no – you can’t use wood crown molding in a shower. Wood is not moisture resistant and so will gradually become moldy and rotten due to humidity from the shower.

How do you install a tub surround on a window?

How do you trim a shower surround?

How do you protect a wall above a shower?

Use Moisture-Resistant Paint

You can apply moisture-resistant paint with a brush or a roller in the space above the shower panels. Although it costs more money, Bob Vila recommends using paint that has an anti-microbial/anti-fungal additive to prevent mold in humid areas.

How do you finish a wall over a shower surround?

Can you cut acrylic shower walls?

Don safety glasses and a dust mask so you don’t inhale the acrylic dust during cutting. Install a 1-inch spade bit into a drill. Place the tip of the spade bit on one marked location and drill through the acrylic to form a hole. Repeat the process to drill holes in each remaining marker location.

How do you cut plastic tub surround?

How do you cut a fiberglass shower?

Step 1: Take Measurements. Take accurate measurements, using a tape measure, if you’re cutting the fiberglass to fit in an alcove. …
Step 2: Put on Protective Gear. …
Step 3: Get Ready to Vacuum Dust. …
Step 4: Cut With a Jigsaw or Reciprocating Saw. …
Step 5: Use a Rotary Tool as an Alternative. …
Step 6: Remove Your Gear ASAP.

Can acrylic shower panels be cut to size?

With the easy to cut and seam systems in the PVC, high gloss acrylic and laminated wall panels you can use wall panels for any sized shower stall. Don’t limit yourself to a grouted tile shower even if you have a custom size anymore.

Can you cut an acrylic tub surround?

These surrounds are made of acrylic, and the panels are attached to the walls with special adhesives. If you are installing a tub surround and you need to cut holes for the faucet and spout or trim it to fit the space around your tub, make sure you cut it carefully to avoid chipping or damaging the tub surround.

How do you cut acrylic bathroom panels?

Cutting. If you find that you need to cut any excess panel off, use your hacksaw. Let the saw do the work, only pushing and pulling gently and slowly to avoid an uneven cut or damage to the panel – particularly an acrylic bath panel. Remember that you should consider any pipes and skirting boards when cutting.

How do you cut acrylic shower liner?

If you have to remove a considerable length of liner, you can use a Stanley knife with a straight edge to cut/mark the liner at the correct place and behind it at the cut/mark to break the excess off at that point. Redress the cut edge with sandpaper.