How to Cover a Broken Car Window Using Garbage Plastic Bag

Driving your car with a hole on the window can be catastrophic and you may end up causing accidents.  This is because there is a probability of external things affecting your concentration. We do not want you to be a victim. As such we are going to give you guidelines on how to cover a broken window before you get a permanent solution.

  1. Gather All the Items Needed

To accomplish this task, you require gather a number tools. These tools include;

  • Hand gloves
  • Vaccum cleaner
  • A harmer or slightly heavy object
  • Masking tape
  • Microfiber cloth
  • Person to help you with fixing. You can do it all alone but an extra hand would be great.
  • Duct tape

  1. Remove the Glass Derbis

Wear your hand gloves and begin the process of removing the broken glasses that still stand strong.  Use the hammer or a slight heavy object to remove any stubborn glasses.

Always ensure you have your hand gloves to avoid cuts.

It is high likely that some glass debris have already fallen inside the car. You cannot cover the broken glass window when this is the case. Use the vacuum cleaner to remove the glass debris from the carpets, seats, and headrest.

When carrying out this step do not be in a hurry. Take your time. Otherwise you may end up injuring yourself thereby halting the whole process. You should prioritize on your safety at all times.

  1. Dusting off

Before you initiate the process of covering the broken window it is important to dust it off. This ensures that you remove any dirty and dust. This ensures that the tape can stick properly.

Moisten a dry microfiber cloth with a few drop of water. Microfiber cloth works best in minimizes chances of scratches. Gently wipe down the window to clean it. You can as well choose to choose wash the window with water.

At the end of this process, wipe the window with a dry microfiber cloth. Then after this you can apply the masking tape.

  1. Application of a Masking Tape

A number of people will tend to overlook this key step. Do not be one of them. A masking tape is important in that it prevents entry of any water and moisture.

It can as well act best in saving the car paint around the frame.

  1. Covering the Hole

This is a key step in these guidelines.

  • Using the garbage bag. To cover the whole, open the car door and sit on the seat next to the broken window. With much attention, measure the dimensions of the whole the length and width. Then place the bag over hole. It is important to check on the plastic bag you are using. We recommend that you use high density bags. The problem with low density bags is that they get puncture so easily and with no time you will be at it again trying to repair the hole.
  • Start by fixing the plastic bag from inside. Then seal it over the window frame.
  • Use your two hands to tightly hold the plastic garbage bag against the hole. This however will depend on the expanse of the hole. If it’s too big you may need another person to help you.
  • Apply the duct tape over the plastic bag.
  • Tape over the middle of the plastic bag. This gives it a stronger bond. There should be no any gaps between two layers of successive tapes. This limits the entry of moisture.

  1. Confirmation that Everything is in Place

After the completion of all the steps we have listed above, it now time to confirm whether everything is in order.

  • Tap on the tape to see whether it sags inwards.
  • If you find any errors, do not hesitate to cover the hole once again.

NB: When covering the hole of a broken window always use transparent material. This is because using a material that looks trendy due to its color might issue a serious threat to your safety and other road users. Also, before you set out tolling with your car that has broken window covered garbage plastic bag familiarize yourself with rules of you area. It is illegal driving a car covered with plastic bag even if it is temporarily.  This remedy serves you on the short run. After some you will need to have the window fixed as a permanent solution.

Tips: Other than plastic bag, there are several materials that you can use to cover a broken window on your car. However, for some materials like cardboard you should desist from using them. This should be your last choice. The reason why we don’t recommend that you use this material is because it has an effect in limiting visibility. Just stick to high density bag.

How do you protect a broken car window until it can be repaired?

How to Protect a Broken Car Window Until it Can Be Repaired
  1. Remove as Much of the Broken Glass as You Can. The first step to protecting your car after the window has been broken is to remove as much of the broken glass as possible.
  2. Wipe Down the Window Seal and Frame Area. Dampen a soft cloth with water.
  3. Seal the Window.

How do I put plastic on a broken car window?

Pull the plastic taut and adhere it to the bottom outer corner of the window frame with a piece of masking tape. Adhere one to two more pieces of masking tape along the sides of the window to secure the plastic. Adhere one to two more pieces of masking tape along the bottom of the window to secure the plastic.

How do you cover a window that won’t roll up?

Door Slam Method
  1. Turn your car on.
  2. Push and hold your window switch down in the desired direction (up or down) as you complete the following step.
  3. While continuing to hold the button down, sit inside your vehicle and slam the car door. Repeat this step a few times and see if the window begins to roll up or down.

How can I temporarily fix my car window?

Create A Temporary Window
  1. On the outside window, stretch a piece of clear tape from the top of the window to the bottom.
  2. Continue to layer pieces of tape across the window.
  3. A clear, temporary “window” begins to take shape.
  4. Repeat until the area is covered.
  5. Follow the same process on the inside window.

How do you roll a car window with a broken motor?

Here’s what you will need and here’s what to do:
  1. Remove the door panel.
  2. Disconnect the window from the motor.
  3. Disengage the motor.
  4. Raise the window.
  5. Reconnect the motor.
  6. Replace the door panel.

Can you manually raise a power window?

Move your palms upward gently and slowly while gripping the glass. Do not allow your palms to slip on the glass. You may have to do this very slowly, but the electric motor gears will turn, and the window will begin to move upward from your actions. Push the window into the seal at the top of the door.

How do you manually raise a car window?

How to Pull Up Power Window Manually
  1. Step 1: Take Out the Door Panel.
  2. Step 2: Detach the Window from Motor.
  3. Step 3: Find and Disconnect the Motor.
  4. Step 4: Attach the Window to the Motor and Raise It.
  5. Step 5: Put Back the Door Panel.

How much does it cost to replace window in car?

Replacing a car window can vary in cost based on various factors, but most people can expect to pay $200 – $450 to replace a window on their vehicle.

Is a broken car window covered by insurance?

A basic policy does not traditionally cover broken windows unless the damages are from an auto accident. If you are in a car accident, however, and your car’s windows are broken due to this, your insurance company may cover it after you have paid your deductible cost.

What is the most expensive window on a car?

From what I understand, the most expensive one to replace is the Quarter Glass. This is because this pane of glass is fixed directly to the frame of the vehicle, thus requires taking lots of pieces of the car apart in order to access it and then replace it.

How much does it cost to replace a broken car side window?

Here are some prices to expect for auto glass repairs: Standard side car windows cost anywhere from $100-$350, depending on the location, year, make, and model of the vehicle. Windows on rarer vehicles can cost upwards of $350.

How do you replace a broken car window?

How do you replace a car window?
  1. Inspect the damage carefully.
  2. Remove the door panel to access the remaining glass.
  3. Vacuum any debris and glass from the vehicle.
  4. Insert a brand new side window.
  5. Test the regulator to ensure the window functions properly.
  6. Replace the door panel.
  7. Clean all of the glass on your vehicle.

What do you do if someone breaks your car window?

What to Do if Someone Breaks Your Car Window
  1. Document the damage.
  2. Report the incident to the police.
  3. Cancel credit cards, deactivate your phone and place a fraud alert (if valuables were left in the car)
  4. File an insurance claim.
  5. Replace your car window.

How much does it cost to replace a car rear window?

The average cost of a rear window replacement is $325. Rear window replacement costs ranged from $200 to $450 in the US for 2019 according to RepairPal. Estimates do not include labor costs, taxes and fees.

Can you drive a car without rear window?

FRESNO, Calif. “The California Vehicle Code says yes, you can have stuff in the back of your car box if it blocks your rear view mirror,” said Sgt. Brian Pennings with the California Highway Patrol. “As long as you have two outside mirrors: one on the left and one on the right.”

Can I drive with a shattered back window?

For most situations, it’s not a safety issue to drive with broken car glass, but it should be repaired or replaced as soon as possible. In the meantime, you should clear away the broken glass and cover the window.

How long does it take to replace a rear window?

How long does it take to replace a rear windshield? – (rear window or back glass)? From removal of the damaged glass to installation of the glass, the entire process takes approximately one hour, and the vehicle needs to sit for an additional hour to give the urethane time to cure.

Does insurance cover broken rear window?

A basic auto insurance policy includes a range of important coverage, from bodily injury liability to property damage liability. But a basic policy doesn’t typically cover your car’s broken, shattered or cracked window unless it was damaged as a result of an accident.