How high should the flame be in my pellet stove?

4′-6”
Once the feeding of pellets is re-established and the stove is running on High, the flame should rise to 4′-6” above the top of the firepot. If not, it may be necessary to adjust the pellet feed rate.

What does a proper pellet stove flame look like?

Proper Flame

The flame on a pellet stove needs to be hot — but not too hot. A low-burning, flickering orange flame, known as a “lazy” flame, is not hot enough to be efficient. … The proper flame is yellow, steady and solid, without flickering or wavering to either side.

How do you adjust the heat on a pellet stove?

You can increase the temperature at which the pellet stove burns by simply increasing the heat setting on the stove. For most modern pellet stoves, this setting can be found on the control located on the stove’s side. Some stoves may have touch screen controls. They can also increase the temperature and other settings.

Why is the flame on my pellet stove so high?

If your pellet stove’s flame is too high and does not move much, it needs more air. These lazy flames also typically have tips that look dark orange or nearly black. To provide more air, pull out or loosen the damper a little to open it up.

How do I increase the airflow in my pellet stove?

If You Have A Tall Flame
  1. Locate The Damper Rod On Your Stove. You will use the same damper rod to increase airflow as you did to decrease airflow. …
  2. Pull The Rod Out. Instead of pushing the rod toward the stove to decrease air, you will need to pull it toward you and away from the stove to increase the airflow.

Do pellet stoves have real flames?

Pellet stoves produce real flames through the combustion of solid fuel. Fuel in the form of pellets are burnt within the combustion chamber of a pellet stove and the flames can be viewed through the glass located at the front of the stove.

How do you set the auger speed on a pellet stove?

Why does the glass on my pellet stove turn black?

Glass on a pellet stove turning black can be caused by an issue with either the fuel or the air supply leading to a poorly combusting fire that’s not burning as cleanly, and releasing more by-products such as creosote as a result. Increased creosote production can lead to increased glass blackening.

Why is my pellet stove not burning pellets all the way?

If your pellet stove isn’t burning well

A blocked air inlet cap also could be to blame. If your inlet cap becomes blocked, you might notice that pellets are not burning entirely. Clean the cap manually to make sure it is not blocked, and inspect it for any damage or leaks.

Can you leave a pellet stove running 24 7?

Pellet stoves are designed for 24/7 operation. Just make sure you keep up with routine cleaning and maintenance as suggested by the manufacturer.

Why is my pellet stove Popcorning?

If the flame is too hot, it will lead to the unwanted popcorning effect, where the pellets that are glowing with potential fire shoot out of the opening of the pellet stove. … When the damper is closed too quickly, it can put out the fire or cause other issues with the quality of the flame.

Why is my pellet stove over feeding pellets?

Why Is My Pellet Stove Feeding Too Many Pellets? A pellet stove that’s feeding too many pellets can be caused by an incorrect set up of the feed rate or a dirty or blocked stove that’s not allowing sufficient air into the combustion chamber, causing poor combustion of the pellets.

Why does my pellet stove fill my house with smoke?

If the exhaust blower is not working, the intake pipe is too long or the hopper is overfeeding the fire box with more pellets than it can consume, the firebox will fill with smoke.

How do you turn off a clinker on a pellet stove?

Preventing Clinkers

Prevent the occurrence of clinkers by using low-ash pellets, and make sure the pellets are small — usually less than 1.5 inches. The larger the pellet, the more likely it won’t burn properly, resulting in a clinker.

Does the top of a pellet stove get hot?

The top of a pellet stove, and other various parts of the system, should only be warm to the touch during operation. Pellet stoves usually have an internal fan that blows air to the heat exchanger. In turn, the appliance uses additional heat to warm the space.

Can a pellet stove get too hot?

Pellet stoves may not typically get as hot to the touch compared to traditional wood burning stoves but can still be hot to the touch depending on the model of stove. Pellet stoves will typically have an internal blower that helps to make the stove more efficient at dispersing heat and rely less on radiating the heat.

What is trim on a pellet stove?

By turning the trim clockwise you can increase the feed rate and prevent the fire from going out. The air intake adjustment lever, located on the bottom-front of the stove, will allow you to regulate the amount of combustion air being fed to the pellet fire pot.

Can I manually light my pellet stove?

Pellet stoves with automatic ignition require less work to light. If it requires you to do it manually, you’ll need wood pellets, a gel accelerant, fire-resistant gloves, and a long-reach butane lighter.

What is the exhaust temperature of a pellet stove?

Maybe 120 to 300 degrees….at the unit….. less after some pellet vent. A lot of air is mixed in, which lowers the temp. Mine seems to run about 150-200 after 12 feet of pellet vent.

Do the sides of pellet stoves get hot?

They have a very small amount of required clearance, as the top and sides of the stove do not get hot. … The front glass of the pellet stove does get hot, as radiant heat is one of the pellet stove’s beautiful benefits. You will not want to touch the glass. The back venting also gets hot, for obvious reasons.

How hot do wood pellets burn?

Also known as secondary burn stoves, they can reach temperatures of 1,100°F—hot enough to burn combustible gases.