How do you reset the anti theft system on a Chevy Malibu?

To reset the 2012 Chevy Malibu anti-theft system, You will start by turning the ignition key to the on position and wait for approximately 10 minutes until the flashing anti-theft goes off. Turn the key off and then go back to the car and start the car up to see if it has been reset.

How do I get my Chevy out of anti theft mode?

How Do I Reset Anti-Theft System: Chevy Silverado?
  1. Insert ignition key.
  2. Turn it to the on position.
  3. Attempt to start the engine. …
  4. Leave the key in that position until the security light stops flashing. …
  5. Once the light goes off, switch the ignition key to off.
  6. Wait about five seconds.
  7. Try to start the engine again.

How do you turn off the alarm on a 2005 Chevy Malibu?

If you lock with the fob and unlock with the key, just stick the key in the ignition and turn it on and the alarm will stop.

How do you bypass the anti-theft on a Chevy Malibu?

First, park the car and make sure all doors are shut and locked. Then, slot in Your key into the driver side door and unlock the car. Once it opens, quickly put Your key into the ignition slot, and set the cars ignition to the ON position. Once the ignition has been set to ON, make sure You dont start the car.

Will disconnecting battery reset anti-theft?

It is another way to solve the problem of anti theft system car wont start. Disconnect the positive terminal of the battery for a minute or two. … It will reset the computer system and your car is likely to kick off.

How do I know if my car is in anti-theft mode?

If your car has a mechanical key ignition cylinder and still won’t start, a flashing or constantly illuminated anti-theft system light might alert you to the fault here.

What does a car with a lock symbol mean Chevy Malibu?

The car and lock symbol is the Chevy Malibu immobilizer warning light. This light should come on briefly when the engine is started, then go out. If the immobilizer light stays on, it means there’s a problem with arming or disarming the theft-deterrent system.

What triggers theft-deterrent system?

The theft-deterrent system in your vehicle may be triggered by the following: Key learning (copy of key made) Forced entry alarm (door, trunk, hood) … Charging alarm (electric vehicles only)

How do you reset the anti-theft system on a car?

Turn on the car ignition by inserting the car key into the car’s ignition. All the accessories of the car are activated except the engine. If the car’s anti-theft light is not blinking, allow the system to reset itself. The resetting is done by turning the key to the off position and resting there for some minutes.

Is there a fuse for anti-theft system?

It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver’s side. Your car model may or may not have additional fuse boxes.

Will disconnecting battery reset car alarm?

Car alarms rely on the electronic component of the vehicle, and disconnecting the battery should both silence the siren and reset your alarm. Open up the hood, locate the battery, and with a wrench, remove the negative terminal. Then reconnect it after a minute has passed.

How do I get my car out of anti-theft mode without remote or key?

Disabling the Alarm Without a Remote
  1. Insert your key into the car’s ignition and turn the key to the “ACC” position.
  2. Locate the transmitter system for your alarm. …
  3. Repeatedly press and release the toggle switch on the system.

How do you reset the anti-theft system on a Chevy Equinox?

To reset the security alarm on the 2010 Chevy equinox you need to lock all the doors, then unlock the driver side and put the key into the on position. Now turn it off and then back on twice and it will reset.

How do I reset my immobilizer?

Hold the panic button for five seconds to reset the immobilizer. Then press the lock button twice and wait ten meters from the car for ten minutes.

How do I bypass immobilizer?

You can bypass the immobilizer by placing the key in keyhole hence deactivating the car’s immobilizer to remote start. The added security with Mobokey allows the security to be activated as soon as the phone moves away from the car, so you don’t have to worry about car security.

Does anti-theft light drain battery?

Yes it will drain your battery but should take so long its not a problem.

How much does it cost to reset anti-theft system?

Reprogramming can only be done by a dealership technician using a factory scan tool, or by an authorized locksmith if you can find one who can do computer keys. The typical charge for this may be $75 to $150 depending upon how long the procedure takes.

How do you start a car with a bad immobiliser?

How do you unlock a car immobilizer?

If You have tripped the car’s alarm by accident, depress the fob’s panic or unlock button, to switch the alarm off. Alternatively, insert the key into the driver’s door to unlock and reset the immobilizer. You can also try pressing the panic button for 5 seconds followed by depressing the lock button 2 times.

How do I find my immobilizer code?

What does it mean if your car won’t start but the lights come on?

Broken or Damaged Ignition

If your headlights can turn on, but your car won’t crank, that means that your battery is charged, but either the starter or ignition is the problem. If the starter or ignition is the problem, a starter engine can be jumped by using a charged battery.