How do you use Bona products?

How long does it take for Bona sealer to dry?

2-3 hours
Bona waterborne products dry in 2-3 hours under ideal conditions. If you are applying the same product then it will be okay to do so once dried. If you are switching to a different product (finishes) then it is recommended to wait overnight, lightly abrade, vacuum then tack before applying the next Bona finish.

Do you have to rinse after using Bona?

Don’t use polish with a sponge, string or wring mop. Don’t dampen Bona Microfiber Cleaner Pad with water. Don’t rinse and wring the Bona Microfiber Cleaner Pad while applying Bona Hardwood Floor Polish to the floor.

Do you need to sand between coats of Bona Traffic HD?

INTERCOAT ABRASION: It is not necessary to abrade between Bona waterborne sealer and finish coats unless more than 48 hours has passed since the previous coat was applied. For smoothest results, abrade between all coats as necessary.

How soon can you walk on bona traffic?

Traffic HD is one of Bona’s fastest curing finishes – fully curing in three days. You can walk over it with socked feet after 3-4 hours. After 72 hours, homeowners can move furniture back in (and once again, lift don’t drag).

How do I remove Bona HD traffic?

How do you apply finish to hardwood floors?

Put your applicator on the floor, and cut into the finish. Then, use it to brush the finish up and down the floor, covering a couple of feet of the room. Apply a moderate, consistent amount of pressure when you push the finish, but don’t push down on the applicator while pulling it towards you.

Can you touch up bona traffic?

Bona Traffic HD Cons

Like Traffic, it is expensive, comes in 1-gallon containers, has a short shelf/pot life and can’t be touched up with polyurethane.

Do I need Bona primer?

Bona Natural Primer can be used for a range of interior projects where preserving the natural, raw or untreated look of the wood is desired.
…
Overview.
Product Use
Bona Intense Primer A 100% polyurethane based primer for finishes requiring better adhesion

How many coats of polyurethane should you put on hardwood floors?

three coats
So, how many coats of polyurethane to add? You should apply at least three coats of polyurethane on hardwood floors.

What is the best way to apply water-based polyurethane to floors?

What finish is best for hardwood floors?

Polyurethane
What is the Best Finish for Hardwood Floors? Polyurethane is the most popular finish for floors. It’s tough enough to handle constant traffic and is resistant to almost everything. There are two types of polyurethane finish: oil-based (solvent borne) and water-based (waterborne).