How does an inline pool chlorinator work?

An inline chlorinator is plumbed into the PVC pipe. Water passes through the chlorinator, dissolving some of the chlorine tablets and dispersing the appropriate amount needed into the water. … The inline chlorinator makes it a much sturdier option and fewer parts to replace.

How do you use a Hayward inline chlorinator?

How does a Hayward CL200 chlorinator work?

The CL200 Inline Chlorinator is designed to automatically feed chlorine to your inground pool by working with your existing pump and filter system. Returning water to the pool flows through the chlorinator which is plumbed inline after the filter.

How do I know if my automatic chlorinator is working?

The easiest way to ascertain if the chlorinator is working is to make sure the cell is clean by checking the needle or production lights. Ensure there is enough salt in the pool. On the chlorinator box there should be a light or dial that indicates it is working.

Should chlorinator be full of water?

The saltwater chlorinator needs a sufficient flow of water for effective operation. A dirty skimmer basket, clogged or dirty filter, and a clogged pump strainer, can cause insufficient water flow for the chlorinator to produce less chlorine.

How do you turn on a chlorinator on Hayward?

How do I reset my Hayward chlorinator?

With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.

How do you troubleshoot a Hayward chlorinator?

The Chlorinator Has an Air Lock

An air lock inside the chlorinator can also reduce flow and chlorination. To clear an air lock, remove the lid, then turn on the pump and allow the chlorinator to fill with water. Turn off the pump; replace the lid, and turn the pump back on again.

How do I know if my salt chlorinator is working?

How do I reset my chlorinator?

What happens if salt level is too high in pool?

Having too much salt in your pool water can result in unnecessarily increasing chemical expenses. But having too little salinity restricts the amount of chlorine being generated and can lead to algae and bacteria growth.

How do I reset my Hayward salt?

To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.

Why is my salt pool not generating chlorine?

Salinity. Chlorine generators need salt to produce chlorine and can’t do so if the amount of salt in the water is too low. The desired salinity level in a saltwater pool is between 2,500 and 3,500 ppm. … If your salinity is below 2,500 ppm, the generator will not be able to produce chlorine.

How long should I run my salt chlorinator?

Typical pool pump operation is 8 hours per day, although it is not uncommon to run longer in the summer months (or with low speed variable speed pumps) or shorter in the winter when bather loads are light.

How do I program my Hayward salt?

What should my salt chlorinator be set at?

We suggest you start your salt chlorine generator at 50 percent output and run it for a couple of days, then check the chlorine level. In a balanced pool, a good chlorine level is 1-3 parts per million. If your chlorine levels are low, you can raise the percentage, and if it’s high you can lower the percentage.

How do you troubleshoot a Hayward salt Cell?

What should my chlorinator read?

On a Hayward Salt Chlorinator, your salt reading should be between 2,700 – 3,400 PPM (parts per million) with the optimum level of 3,200 PPM.

What temperature does a Hayward salt Cell stop working?

60 degrees
In pool water temperatures that are 60 degrees or below, the salt generators simply shut down and by design do not allow the salt cell to ionize (breakdown) the salt and convert it to chlorine.