Are 7/16 and 10mm the same?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch.

What millimeter is a 7 16?

SAE to Metric Conversion Chart
Standard (SAE) Metric (mm) Inches (decimal)
7/16″ 11.1125 mm 0.438″
15/32″ 11.9063 mm 0.469″
12 mm 0.472″
1/2″ 12.7 mm 0.5″

Is 7/16 bigger than 12mm?

11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) … 15mm = almost 19/32 inch. 16mm = 5/8 inch.

What size is 7 16 metric?

Metric / Standard Wrench Conversion Chart
Bolt Diameter Metric Standard
7/16″ 16mm 5/8″
1/2″ 19mm 3/4″
9/16″ 21mm 13/16″
22mm 7/8″
•
Apr 9, 2020

What is 7 16 as a decimal?

0.4375
Answer: 7/16 as a decimal is equal to 0.4375.

What is 7 16ths of an inch?

0.4375
The decimal equivalents of eights, sixteenths, thirty-seconds and sixty-fourths of an inch.
Inches
fractional decimal
3/16 0.1875
5/16 0.3125
7/16 0.4375

What’s equivalent to a 36mm socket?

Wrench Size And Conversion Table
Inches Millimeters Spanner
1.390 13/16 Wworth; 15/16 BSF
1.417 36mm 36mm
1.418 1 7/16 AF
1.480 7/8 Wworth; 1in BSF

What is the answer if we convert 12 cm to mm?

Centimeters to Millimeters table
Centimeters Millimeters
12 cm 120.00 mm
13 cm 130.00 mm
14 cm 140.00 mm
15 cm 150.00 mm

Is MM metric or standard?

Metric Measurements

Metric is the preferred fastener measurement throughout the world. More exact than fractions of an inch, metric measurements–based on millimeters–are a precise representation of the diameter of the head of the fastener. Imported cars have used metric bolts for more than 30 years.

Is a 3/8 socket the same as a 10mm?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard.

What is a 17 mm wrench in standard?

SAE to Metric Conversion Chart
SAE Metric Inch
21/32″ 0.656
17mm 0.669
11/16″ 0.688
18mm 0.709
•
Apr 29, 2020

What is a 13mm wrench in standard?

Standard / Metric Wrench Conversion Chart
Bolt Diameter Standard Metric
3/16″ 3/8″ 10mm
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
3/8″ 9/16″ 14mm
•
Aug 26, 2019

Is there a 10.5 mm socket?

1/4″ Drive Twist Socket – 10.5mm.

What size is 10mm?

MM Approximate Size In Inches Exact Size In Inches
10mm Little over 3/8 Inch 0.39370 Inches
11mm 7/16 Inch 0.43307 Inches
12mm Just short of 1/2 Inch 0.47244 Inches
13mm Little over 1/2 Inch 0.51181 Inches

What is a 10mm socket used for?

For those of you who are non mechanically oriented, the 10 mm socket is probably the most used, most popular metric sized socket around for many medium sized nuts and bolts.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

What is 10mm in fraction?

Millimeters to inches conversion table
Millimeters (mm) Inches (“) (decimal) Inches (“) (fraction)
10 mm 0.3937 ″ 25/64 ″
20 mm 0.7874 ″ 25/32 ″
30 mm 1.1811 ″ 1 3/16 ″
40 mm 1.5784 ″ 1 37/64 ″

What size bolt takes a 10mm socket?

The standard 6mm cap screw has a 10mm head.

What size socket is M6?

BUTTON HEAD SOCKET CAP SCREW – METRIC
Size Head Diameter Hexagon Socket Size
M4-0.7 7.60 2.50
M5-0.8 9.50 3.00
M6-1.0 10.50 4.00
M8-1.25 14.00 5.00

What socket is always missing?

The Two sockets that most often go missing are the 10mm and the 13mm (1/2″) sockets. Reason: most common size ised for nuts and bolts, machine screws or the larger guage TEK hex head screws when your driver bit goes missing.

What wrench is always missing?

It seems like the 10mm bolt size is the most common bolt size across most cars so, naturally, you’re going to use the 10mm socket the most. But, since the 10mm socket is so small, if you don’t remember where you place it, this is the socket you’ll most likely lose, hence all the memes.