What size house will a 3-ton AC unit cool?

For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.

What size AC do I need for 2000 square feet?

Step 5: Match your square footage to an HVAC size chart
Home Sq Footage Air Conditioner Size (tons)
600 – 1,000 square feet 1.5 tons
1,000 – 1,500 square feet 2 tons
1,500 – 2,000 square feet 3 tons
2,000 – 2,500 square feet 4 tons

Is a 3-ton air conditioner enough?

Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU’s you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU’s (3 tons) to maintain energy efficiency.

What size air conditioner do I need for a 3500 square foot house?

Many homes especially in warm climates have more than one central air conditioner. For example, consider a 3500 square foot home in Zone 2 with a Very Sunny rating. It would need between approx. 76,000 and 104,000 BTUs of cooling!

How many square feet does a 3 ton unit cover?

3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.

Can I replace a 3 ton AC with a 4 ton?

Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn’t that much less than full capacity because of the unloading scroll systems.

How many square feet does a 3.5 ton AC unit cover?

ZONE 1 ZONE 2
3 Tons 1501 – 1800 sf 1501 – 1850 sf
3.5 Tons 1801 – 2100 sf 1851 – 2150 sf
4 Tons 2101 – 2400 sf 2151 – 2500 sf
5 Tons 2401 – 3000 sf 2501 – 3100 sf

How much is a 3 ton AC unit installed?

AC Installation Costs by Tons
Central Air Conditioner Size AC Unit BTU AC Unit Only
2.5 Tons 30000 BTU $2,895
3 Tons 36000 BTU $2,920
3.5 Tons 42000 BTU $3,550
4 Tons 48000 BTU $3,650

What SEER AC should I get?

For most homeowners, opting for a unit with a SEER between 15 and 18 is a good choice because it’s a balance between the money you’ll spend for the unit and the amount you’ll save on utility costs.

What size AC unit do I need for a 1800 sq ft house?

3-ton
Here’s some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.

What is the difference between a 2.5 ton and 3 ton AC?

Air Conditioning Sizing

The general guideline is a 2.5 ton unit for a home that’s 1,500 to 2,000 square feet. A 3 ton unit is ideal for a home that’s 2,000 to 2,500 square feet.

Is 2.5 ton AC big enough?

According to this common but somewhat inaccurate method, you need 1 ton of air cooling capacity for every so many square feet of living space. While there’s some dispute over the exact amount, an often-used amount is 600 square feet. A 2.5-ton unit, then, theoretically would fit a 1,500-square-foot home.

What size central air conditioner do I need for a 1500 sq ft home?

As a rule of thumb, you need 30,000 BTU for 1,500 square feet. So, you need a 2.5 Tons air conditioner for a 1,500 square feet room. If your room is below 1,500 square feet but more than 1,200 square feet, you can use a 2 Tons air conditioner. A 2.5 Tons air conditioner can be used up to 2,000 square feet.

What size air conditioner do I need for a 2400 square foot home?

60,000 BTUs
The answer to the question, “what size AC unit for 2400 square feet?”, would be, is 60,000 BTUs or 5 Tons. It’s possible to fall between unit sizes, so if that’s the case with you, then you should choose the next higher size. That way, you can be sure that the AC unit can still cool a given area sufficiently.

How much area does a 2 ton AC cover?

A 2-ton air conditioner is large enough to cool a room between 200 and 260 square feet.

What size AC do I need for 1200 sq ft?

STEP 1: Determine how many BTUs of heating and tons of AC you need
House Square Footage BTUs Needed
500 – 700 14,000
700 – 1,000 18,000
1,000 – 1,200 21,000
1,200 – 1,400 23,000

How many ton AC do I need for 1600 square feet?

4.0 tons
Assuming the minimum cooling capacity of 400 square feet per ton for your HVAC unit, a 1600 square foot home will require 4.0 tons of air conditioning to cool. Your HVAC unit will need to remove about 4.0 x 12,000 BTUs, or 48,000 BTUs, per hour to keep your home cool.

Which is better 3 star or 5 star AC?

The 5-star ACs are more energy-efficient than a 3-star AC unit. The electricity consumption of a 5-star AC (1.5 tons) is approximately 1.5 units per hour, whereas a 3-star AC (1.5 tons) consumes 1.6 units every hour.

Which AC is best for 10×10 room?

The #1 Voltas is a 3 Star Split AC. The second Whirlpool 1.5 ton 3 star split ac. The 3 Star Inverter Split AC is used by the #3LG.

What size air conditioner do I need for a 1300 sq ft house?

When looking for the quick answer to how much air-conditioning power you’ll need to adequately cool a 1,300-square-foot space, the answer is 23,000 BTUs per hour of air conditioning power. This is the base capacity needed for a 1,200- to 1,400-square-foot house.

Which is No 1 AC in world?

1. Daikin. If you ask somebody for a suggestion of the AC brand name, Daikin is a name that you will certainly hear. Daikin is a Japanese electronics business and the first in the world’s best AC brand list.

Is it worth spending on a 5 star split AC over a 3 star one in terms of power bill?

On average, a 5-star air conditioner can save up to 28% more energy than a 3-star air conditioner. You can calculate the total amount of heat the AC eliminates with the total amount of energy it consumes to do that task. A higher rating equates to better efficiency.