Can you drive with a bad spindle?

Driving with a bad wheel bearing can cause the axle/hub/spindle to weld itself from friction and heat causing the wheel to lock up and spin you out. More likely, the metal will wear away from the friction and the wheel/hub will become loose.

Can you repair a car spindle?

As long as the spindle end is not split or metal is missing, the end can be welded up, machined down, and rethreaded. A spindle that has had excessive heat from a burned bearing will be damaged to the point that it needs replacing.

How long does it take to replace a spindle?

A quick turnaround for an emergency spindle repair job would be 24 hours, but the standard turnaround time for a straight repair is between 5-10 business days. In some unique cases, depending upon the need to make repairs or obtain new parts, a spindle repair job can take a few weeks.

What is a spindle for a car?

In an automobile, the wheel spindle, sometimes simply called the spindle, is a part of the suspension system that carries the hub for the wheel and attaches to the upper and lower control arms. Spindles are carried by steering knuckles or “uprights”.

Where does a spindle go in a car?

A spindle is a part of a vehicle’s suspension. Tying the wheel and tire into the steering system, the spindle is in the front of the vehicle in most cases; however, some front-wheel drive vehicles also have rear spindles. The spindle pivots between the upper and lower A-frames or on the strut.

Is a spindle and knuckle the same?

In automotive suspension, a steering knuckle or upright is that part which contains the wheel hub or spindle, and attaches to the suspension and steering components. The terms spindle and hub are sometimes used interchangeably with steering knuckle, but refer to different parts.

What is a spindle hub?

When you’re towing, spindles are the part of the trailer axle assembly that the wheel hubs (and wheels) rotate around. … The inner and outer wheel bearings keep the wheel hub and the spindle from actually contacting one another. In other words, the spindles are literally at the center of it all.

Whats a spindle in a car?

In an automobile, the wheel spindle, sometimes simply called the spindle, is a part of the suspension system that carries the hub for the wheel and attaches to the upper and lower control arms. Spindles are carried by steering knuckles or “uprights”.

What does a spindle do?

A spindle provides the twist that turns fiber into yarn. When using a hand spindle, your hands let the fibers slide past each other and then let the twist catch them, a process known as “drafting.” The size of the yarn is determined by how much fiber is caught in the twist.

Can you replace spindles on a trailer?

Spindles are welded to the axle, so a do-it-yourself replacement may be out of the question for some trailer owners. … There are very few bolt-on spindles available; in fact, most spindles are welded to the axle tube. Replacing a spindle requires breaking the existing weld and then welding the new spindle in place.

Is a spindle an axle?

Axle is a non-rotating member used for supporting rotating wheels etc. and do not transmit any torque. Spindle is simply defined as a short shaft. Shaft is a rotating member has a circular cross-section and is used to transmit power.

Are there different size spindles?

There are a few common spindle sizes found on Trailer Axles rated at 3,500lbs or less. … A “Standard Spindle” hub will measure between 4” and 4-1/16” while a “Short Spindle” hub will measure 3-1/2”.

How do I know if my trailer spindle is bad?

Look for an scarring, gouges, discoloration, or scoring on the spindle. If the spindle is damaged then the bearings won’t ride properly and can fail again or it can cause other problems such as uneven or excessive tire wear and ride quality problems.

How do you remove a spindle?

Lay a thin hand saw blade on the tread of the stair so that its teeth are where the bottom of the spindle and the top of the tread meet. A little wooden dowel pin connects the two together. Move the saw back and forth to slide under the spindle and cut the dowel pin. Repeat this process for each spindle.

Can you replace spindle on torsion axle?

If you have an Eliminator Torsion axle you can replace the spindle. … If the torsion arm is exposed on the backside, you can place the castle nut back on the spindle so that it is even with the end of the spindle, and then hitting the rear of the spindle to force the spindle loose.

What causes a spindle to go bad?

Improper Lubrication:

This can lead to increased wear due to friction as well as thermal damage due to higher operating temperatures. The resulting damage to bearings can include rolling element deterioration, raceway deterioration, cage fragmentation, and eventually spindle failure.

When should I replace my spindle?

A spindle that has had excessive heat from a burned bearing will be damaged to the point that it needs replacing. Sometimes the bearing is stuck on the spindle and cannot be taken off. Other times the spindle is obviously damaged due the bearing burning up and hub falling on the axleshaft which rides on the spindle.

What causes a bad spindle?

Spindle damage can be caused by a variety of factors which can include but not limited to: high mileage, bearing failure, improper bearing installation.