How do I calculate how much gravel I need for my driveway?

Measure the length and width of your driveway in feet. Multiply the length by the width to get surface area and divide the result by three because 4 inches is 1/3 of a foot. You now have the volume of gravel needed in cubic feet. Divide the volume in cubic feet by 27 because there are 27 cubic feet in a cubic yard.

How much area does a ton of gravel cover?

approximately 100 square feet
A ton of gravel will cover approximately 100 square feet, 2 inches deep.

How deep should my gravel driveway be?

A standard driveway is between 12 and 18 inches deep.

Each of these gravel layers is a minimum of four inches deep, and some folks recommend making each layer as much as six inches.

How do you calculate gravel?

Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.

How much will a dump truck load of gravel cover?

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

How many square feet will 5 tons of gravel cover?

How much area does 5 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.

How many inches of stone do I need for a driveway?

According to the Home Depot, 4 to 6 inches of rock or gravel is needed for a driveway. Convert your estimated rock depth in inches to feet by dividing the number of inches by 12.

What type of gravel is used for driveways?

These are the best options for driveway surfaces gravel, because they are small stones combined with rock dust, which makes a more solid driving surface.
  • Crushed Stone #411. It is crushed up #57 stone combined with rock dust. …
  • Quarry Process. …
  • Pea Gravel. …
  • Jersey Shore Gravel. …
  • Marble Chips. …
  • Blackstar or Blacktrap Rock.

How deep should you lay gravel?

Decorative aggregates should be laid at a depth of 50mm. This ensures proper coverage without revealing the surface below. Laying the gravel too deep will mean you sink into the surface and it becomes difficult to walk across.

What size is #2 gravel?

1-1/2″
This primarily 1″ crushed, washed gravel with a top size of 1-1/2″ is often used for drainage around perforated pipe, under concrete slabs, and as a coarse driveway topping for soft, very muddy driveways.

What size is #3 gravel?

between 1/2 and 2 inches
#3. Crushed stone #3 includes stone between 1/2 and 2 inches. This material is a great choice for railroad projects and those that require drainage.

What is the cheapest gravel for a driveway?

pea gravel
Cheapest gravel for driveways. The cheapest gravel for driveways is crusher run, crushed shells, crushed concrete, slate chips, recycled asphalt, and pea gravel, which all cost $15 to $30 per yard, or less than $1 per square foot when purchased in bulk from a quarry.

What is G1 gravel?

G1 Crushed Stone for base course is not the same thing as crusher-run and it is not only a matter of density. It was developed during the late 1950’s from single stage crusher-run material that complies with Fuller curve particle grading and very strict material and construction specifications.

What is #6 gravel?

small river rock
#6 Stone is often referred to as small river rock. It is made out of local round fieldstone that has been graded from 1/2″ to 3/4″. It can be used for decorative or drainage purposes.

What is #5 gravel?

#5 Gravel Stone, Limestone.

The course material is used in drainage, as ballast or in irrigation systems. The size ranges from half an inch to 1 inch.

What is #67 gravel?

67 stone is a limestone aggregate averaging 1/2″ in size. Our 67 stone is graded and has no fines and very little stone dust, meaning it will have minimal compaction. Description: A 1/2” crushed limestone aggregate. Color: Bluish gray color.

What is G4 gravel?

G4 Sub-Base Material is used as filling and a base coarse under roads and paving. This material may contain approved additional fines not obtained from parent rock. Added fines shall have a liquid limit not exceeding 25 and a plasticity index not exceeding 6.

What is Type 2 gravel?

Type 2 gravel is a combination of small stones (no more than 1.5” in diameter) and stone dust typically used in the construction industry. It is not used as a decorative or landscaping material. Because it contains stone dust, Type 2 gravel will settle and become more compacted than gravels that do not include dust.

What size is #57 gravel?

around 1 to 1.5 inches
Stones in AASHTO #57 blend are detected with a 1.5-inch sieve, which is why the #57 stone size is around 1 to 1.5 inches. Its size makes it useful for weight-bearing applications such as foundation beds and driveways.

What is #2 stone used for?

Usage: Drainage around perforated pipe. Under concrete slabs.

Is 57 stone good for driveways?

57 granite is larger, which leaves larger spaces between the stone. Because of the size and shape of this gravel your tires can spin a little when driving through, but does provide excellent drainage for a driveway. This is a very popular option and looks really nice when spread.