How much will a 50 lb bag of pea gravel cover?

A 50-pound bag of pea gravel is equivalent to 0.5 cubic foot, so two 50-pound bags cover 1 cubic foot. Knowing that a 50-pound bag of pea gravel averages 0.5 cubic foot makes the calculation easy — and one most smartphone calculators can complete.

Is 2 inches of pea gravel enough?

How deep should pea gravel layers be? — Typically, each layer of gravel should be between 2 and 2.5 inches.

How much does 2 tons of pea gravel cover?

Consult with the local supplier to find the density of the pea gravel product. In general, a ton, or 2,000 lbs., will cover 100 square feet at a 2-inch depth. A hundred square feet is equal to a uniform square that is 10-by-10 feet.

How many square feet does a yard of pea gravel cover?

324 square feet
We know that 1 cubic yard of pea gravel covers about 324 square feet at a depth of 1 inch. Divide that 324 by your desired depth of gravel in inches to figure out how many square feet you can cover with 1 cubic yard of pea gravel for your project.

Does pea gravel need a base?

There are a couple of ways to create a pea gravel patio: using bare ground as a base or over a base layer of crushed stone. If you have loose or sandy soil, you’ll need a base layer. If the soil in your area is a hard clay soil, it may support the pea gravel on its own.

Does pea gravel compact?

It’s made from stone dust fines and crushed stone. The stone dust will settle and become compact to create a semisolid surface that is smooth. It is important that you know that this type of surface gravel needs to be sloped towards the sides of your driveway for better drainage.

How do I calculate how much gravel I need?

Measure the length and width of the area in feet and multiply the figures together. Multiply your area figure by the depth of gravel that you wish to use, ensuring your measurement is also in feet. If your depth is in inches, divide it by 12 first. You now have a cubic feet volume figure.

Is pea gravel cheaper than pavers?

It is cheaper than pavers, easier to lay than flagstone, and you can usually get the job done in just a day. 2. You can walk on it barefoot without experiencing discomfort. Because pea gravel is smaller and usually rounded in shape, it is easier to walk on this product with a variety of footwear.

What is the cheapest gravel for landscaping?

These are the top three commonly used cheap rocks for landscapes and their costs: Crushed Granite – $50 to $70 per cubic yard. Pea Gravel – $2 to $3 per bag. River Rocks – $0.05 to $0.35 per pound.
…
Now, let’s discuss each one in detail:
  1. Crushed Granite Landscape Rocks. …
  2. Pea Gravel Landscape Rocks. …
  3. River Rocks for Landscaping.

How much pea gravel do I need for a patio?

For a 16-by-16-foot area, 3 inches deep, you will need 1.58 cubic yards of pea gravel. Depths more than 3 inches can be difficult to walk in; depths less than 2 inches will become exposed after time.

How deep should my gravel be?

Gravel 1-1/2” to 2” will need to be 3” deep, and 2” to 4” gravel needs to be 4” deep. This is to provide complete coverage and so you cannot see the landscape fabric (weed-mat) through the gaps in the gravel.

How many square feet will 5 tons of gravel cover?

How much area does 5 tons of gravel cover:- typically, as 1 ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sf coverage, therefore 5 tons of gravel can cover around 540 square feet or 60 square yards or 50 square meters area for standard 2 inch depth.

How much pea gravel do I need for 400 square feet?

Calculate 1B Pea Gravel
Coverage (Square feet) 400 sq ft
Volume (Cubic yards) 2.5 cu yd
Estimated amount (Pounds) 5,951 lb
Estimated amount (Tons) 2.98 ton
Amount +15% compression 3.42 ton

How much area does a bag of pea gravel cover?

A single bag of pea gravel pebbles covers up to 2.75 sq. ft.

What area will a 25kg bag of gravel cover?

For Decorative Gravel

As a rule of thumb 1 of our 25kg bags will cover an area of 0.25m to a recommended depth of 50mm.

How much pea gravel is a ton?

Pea Gravel Coverage: Each ton covers approximately 60 square feet at 4″ deep, 80 square feet at 3″ deep, or 120 square feet at 2″ deep.

How much does .5 cubic feet of pea gravel weigh?

Multiply your cubic feet by 96 to find the total number of pounds you’ll need. (A single cubic foot of pea gravel weighs about 96 pounds.)

How much gravel is in a dump truck?

How many yards of gravel in a dump truck:- a standard sized dump truck is always recommended for your project. It can carry about 15 to 16.5 cubic yards of 3/4″ or pea gravel per truckload. Thus, a dump truck can have capacity to hold 15 to 16.5 cubic yard of gravel per truckload.

Is pea gravel cheaper than concrete?

Pea gravel is cheaper than a majority of other fillers, like concrete and other larger stones. Its cost ranges from around USD 35 to USD 55 per cubic yard. Also, it can be compacted better than the large-sized fillers.

How much will a dump truck load of gravel cover?

Understanding Size and Coverage

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.