Do I need 2 layers of subfloor?

That’s the usual approach. Almost no one puts down double-thick subfloor in residential applications (for cost and handling reasons), and both layers need to be fastened to joists. Only thin underlayment can be fastened just to the subfloor.

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

How thick does the subfloor need to be for hardwood flooring?

3/4″
A wood subfloor should be OSB or plywood of 3/4″ or thicker for a hardwood floor installation. Particle board and chipboard are unacceptable for solid hardwood installations, but may be used in an engineered flooring install.

What kind of plywood do you use for subfloor?

Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring. The tongue-and-groove edges interlock to resist movement along the panel edges and create an overall stiffer floor.

Do you nail or screw subfloor?

Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.

Do you need tongue-and-groove for subfloor?

For subflooring, you use tongue and groove plywood. The tongue and groove are only along the 8 foot edges. On the four foot edges, your seams will fall on joist tops, so no need for tongue and groove.

Is it OK to use treated plywood for subfloor?

There’s no need to worry about making treated wood safer that is completely covered in other materials and hidden from access, such as subflooring. Pressure treated wood doesn’t release any gases or particulates that could harm you and your family.

Can I use 7/16 OSB flooring?

Oriented strand board, or OSB, is a wood structural panel that can also be used for flooring. It is made from shredded strands of wood pressed together with wax and a special adhesive, then hot pressed into a panel with up to 50 layers of strands. OSB can be used for subfloors, although it is not as common as CDX.

What size screws 3/4 plywood subfloor?

You’ll want the screw to go about an inch past the plywood into the joist or underlying layer beneath it. So if your subfloor is 3/4 of an inch thick, any screw about 1 3/4 inches long will do the trick. If the plywood subfloor you’re placing is 5/8 of an inch thick, you need a screw about 1 5/8 inches long.

What is underneath a subfloor?

Underlayment

The underlayment material is installed below the floor covering and placed on top of a sub-floor. Under the visible covering, there is a layer made of soft or foam-like materials with a thickness of between 1/4- or 1/2-inch. … Some common choices include; foam, hardboard, cork, plywood, and cement board.

What can I use for a subfloor?

Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Can I leave my deck untreated?

It is highly unlikely that the deck will rot, splinter or decay if you choose not to have it finished and you can always choose to stain and protect the deck at a later date.

Can you use subfloor as your floor?

Concrete subflooring is acceptable as regular flooring, as long as it’s in a moisture-proof environment. Consider the long-term effects of leaving your subflooring exposed.

What are 3 common subfloor materials?

Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels. There are other subfloors materials out there, but they are used in more niche situations. The construction industry is constantly evolving.

How many layers of plywood do you need for a subfloor?

Just 1 layer of 3/4 “ or 5/8” will do for most applications. If your finished floor is going to be heavy ceramic tiles, natural stone, and alike it may need to be thicker and or have more supports. Codes vary. In the US, ¾” is common, but that’s still one layer.

Is pine OK for subfloor?

Yes, you can use pine subfloors as primary flooring. In many older houses, the pine subfloor was the only floor and it held up well. Uncovered pine subflooring appeals to recycling enthusiasts as well as fans of distressed wood.

Is pine Good for subfloor?

A pine floor will be soft, so it will acquire dings, dents, scratches, and scuff marks easier than other harder flooring options. … The best species for flooring is Long Leaf Heart Pine, due to the fact that it is more stable and durable compared to other Heart Pine species.

Is it OK to walk on subfloor?

Subfloor: The subfloor is installed across the joists. It is a flat structure that can be made from a number of different materials (we’ll discuss the types of subflooring materials next). Subflooring is sturdy and strong, but definitely not pleasing to look at or walk on.

Is OSB good for subfloor?

Some builders prefer OSB over plywood for flooring because the surface, when new, is always clean, flat, and knot-free. Since OSB is so dense, it’s a good soundproofing product. OSB is a more consistent product than plywood or other types of material for subfloor: every sheet is the same.

Can you waterproof subfloor?

Waterproof plywood for bathrooms is moisture-resistant and can be used for subfloors. … To waterproof the plywood yourself, first repair it if needed and then sand it down and clean it off. Use a waterproof sealant, stain or paint and apply two to three layers.

How much does it cost to put in a new subfloor?

Average Cost of Replacing Subfloor. Replacing subfloors will cost between $1.45 and $7 per square foot for materials. Labor costs will be around $27.50 per hour. The project requires the removal of the finished flooring and damaged area and the installation of a new material.

What is stronger plywood or OSB?

OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. … Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.

Is MDF good for subfloor?

Using a water-resistant membrane underneath your MDF is advisable, also, especially if the underlay is over a concrete subfloor.
…
Pros and Cons of MDF as an Underlay Material.
Pros Cons
Smooth finish Brittle
Capable of withstanding humidity more than wood material Potentially toxic dust
•
Dec 1, 2020

Is it OK if OSB gets wet?

Your framing lumber and the oriented strand board (OSB) are going to be fine. The glues used to make OSB are water-resistant because the manufacturers know that virtually no one can build a home that won’t get wet before the roof and siding is applied. … The OSB floors should be swept clean each day after work concludes.