How do you get into a safe without the combination?

There are several ways to get into a safe when you don’t have the combination. If the safe is open, a new code can be set for you. If there is an override key you can get that key made by a locksmith. If the safe is locked, you can have a locksmith retrieve the safe’s original code from the manufacture.

How do you open a locked safe?

Spin the dial of your safe right (clockwise) until the dial stops and open your safe. If your dial does not stop on its own, you may have the wrong combination and should try again. If you’re entirely sure you have the right combination, proceed to troubleshoot using the next steps.

How do you open a safe when a combination doesn’t work?

When a safe won’t open with the combination first try relieving pressure on the bolt work of the safe and check for a loose screw in the handle. If that does not open safe open, test for wear on the dial (a.k.a “drift”).

How do you open a safe if you lost the key?

Simple safe can be unlocked without a key using a small knife with a pointy tip. Insert it into the key hole and wiggle it slightly from side to side. The lock will open up within seconds if performed correctly.

How do you open a combination safe with a key?

Start by turning the dial to the RIGHT a minimum of 4 turns (this clears the dial of any previous attempts) and STOP on the FIRST number of your 4 digit combination. Turn the dial to the LEFT passing the SECOND number TWICE, stopping on the SECOND number of your combination on THIRD turn.

How do you break a combination lock?

How do you clear a combination lock?

Start by spinning the dial three or four times clockwise to clear it, then stop on the first number of the combination. Turn the dial counterclockwise one full turn, passing the first number, then stop on the second number of the combination.