How can I remove dents from my car at home?

4 Simple Ways To Remove Smaller Dents From Your Car
  1. Remove a dent with a hair dryer. Locate and measure the dent. …
  2. Use a plunger. A plunger is a magic tool. …
  3. Fix a dented bumper with boiling water. …
  4. Use a vacuum cleaner and a bucket.

Can I remove a dent myself?

Not only can you unclog a drain with a plunger, but you can also get out small- to medium-sized dents out of your car too. Just splash some water on both the plunger and the dent and start pushing and pulling until it pops out. Make sure to use a cup plunger (for sinks), not a flange one (for toilets).

How do I fix a dent in my car?

Heat the dent with a gun/blow dryer and push it out with a suction dent puller. Once the dent size is reduced, clear the area with a microfiber towel. Heat the glue and apply it to the dent. Repeat the same procedure as done in fixing minor dents in metal.

Does boiling water remove dents in metal?

Before applying tools, try the following: wash the dented surface with hot, possibly boiling water. With a bit of luck the metal will flex and pop back in its original form. … The hot water always supplies sufficient heat to make the paint and the material smooth.

Do dent pullers work?

Dent pullers only work on shallow dents on flat, flexible surfaces. They can improve the appearance of dents but probably won’t create a perfect finish. But these tools will not work on deep, angular dents or damage along the edges of bodywork.

How do you get a dent out of a car with hot water?

This can be accomplished by dousing the dent with hot water. Heat water to boiling in a pot or big tea kettle and pour it over the dent. Wearing gloves to protect your hands, quickly reach behind the bumper and push out the dent. If you can’t get behind the bumper easily, remove it from the car for the procedure.

Does hot water and plunger remove dents?

You’ll need a pot of very hot water and a simple plunger. … Put the plunger over the indented area and pull straight out. Your dent should pop right out. If you’re working on a bumper, you can also reach behind the dented surface to push the dent out.

How do I get a dent out of the corner of my car?