How do I connect my HP LaserJet P1102w to wireless network?

Go to Software and Driver Downloads, type your printer name, and then press Enter. Download the full feature software, and then follow the on-screen prompts to install and set up the printer on a wireless network. When prompted, restart your computer to finish the install.

Where is the WPS PIN on HP P1102w?

Go to the HP printer control panel and press the Wireless Button. Now the Wireless BLUE light will start blinking. On the printer screen, you will find the option “WiFi Protected Setup“. Go to “WiFi Protected Setup” and select “WPS PIN“.

How do I reset my HP LaserJet Pro m102w?

What is the IP address for HP LaserJet P1102w?

IPv4 Address: The address the router has assigned your printer, which will be of the form 192.168. 0.257.

How do I find my HP LaserJet IP address?

Touch Settings > Wireless > Display Network Configuration > Display Network Summary (or similar). It should display at least 4 lines: Hostname, IP Adress, MAC and SSID.

Why is my HP LaserJet P1102w offline?

When the printer status is “Offline,” it indicates that the computer cannot communicate with the printer. This issue can occur for various reasons, such as the following: The printer is turned off. The network cable or USB cable is disconnected.

How do I connect my HP LaserJet printer to my phone?

Add a printer using Wi-Fi Direct: On your printer, make sure Wi-Fi Direct is turned on. On your mobile device, tap All printers > Add printer, and then tap HP Print Service or HP Inc. Tap Directly to the Printer, select the name of your printer with DIRECT in the name, and then tap OK.

Why is my HP LaserJet printing blank pages?

Dirty printhead. Your printhead might be so dirty it might clog up the printer and thus causing it to print blank pages. Once you are inside the “Tools” section, find the “Clean Printhead” option and press OK. Be sure to check the print quality once the cleaning is complete.

Why won’t my printer print even though it is connected?

The printer you plugged in to a USB hub on a system with too many peripherals to accommodate a direct connection may refuse to work that way. Shut down the printer and restart to reset on the printer end. If that is not the issue, check the connection at your wireless router and reset the router as well.

How do I fix HP printer not printing?

Resolving Print jobs stuck in queue and other printing problems using the HP Print and Scan Doctor
  1. Windows: Download HP Print and Scan Doctor.
  2. Run HPPSdr.exe from the download location on your computer.
  3. Once HP Print and Scan Doctor is open, click Start, and then choose your printer.
  4. Click Fix Printing.

Why is my HP printer not printing everything on the page?

Check the Printer Preferences

Under Manage your Device, click on Printing Preferences. Click the Paper or Paper/Quality tab. In the Type or Paper Type field, make sure that Plain Paper is selected. Click the Print Quality filed and set it to Draft or Normal, or click on the Graphics tab and select Standard for Quality.

How do I reset my HP printer?

Why won’t my HP printer print after I changed the ink?

If your ink cartridge sat in storage for any length of time, the ink may have started to dry out. Running an extended cleaning cycle may correct the problem and help the printer recognize the cartridge. After running the cleaning cycle, print a test page to determine whether the printer can print again.

How do I reset my HP printer after refilling ink?

How to Reset Ink Levels on an HP Cartridge
  1. Locate and take out both the black and the color ink HP cartridges from your printer.
  2. Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off.
  3. Replace the black and the color HP cartridges inside the printer.

How do you reset an HP ink cartridge?