How do I reset my Lorex DVR to factory settings?

If you are able to locate the reset button, follow this procedure to reset the Lorex DVR/NVR to factory default:
  1. Power off the DVR/NVR.
  2. Press and hold the reset push button.
  3. Power on the DVRNVR.
  4. Keep the reset push button pressed for 30 seconds.
  5. After you see the startup wizard on the screen, create a new password.

How do I reset my DVR to factory settings?

To factory reset the device, unplug the DVR from power. Once power is removed from the unit, press and hold the factory reset switch for 4 – 5 seconds, continue holding the reset switch and plug the DVR’s power supply back into the unit, you will hear a beep.

How do I reset my Lorex NVR without password?

A: If you have forgotten the password for your NVR, you must call Lorex Technical Support to have the password reset. For security, there is no way to reset the password yourself.

How do I bypass password on Lorex?

You can reset the password for your Lorex account by entering your Email address. A verification email will be sent to you with a verification code.

How do I reset my DVR without a password?

Here are the ways you can recover from a lost password.
  1. Use the DVR factory default password.
  2. Use a DVR password generator.
  3. Update the firmware and reset the DVR.
  4. Reset the DVR by removing the battery.
  5. DVR physical reset with jumpers.
  6. Delete the password file by using telnet.

How do I reset my Lorex camera password?

For a password reset on your device, contact Technical Support.

Press the Modify icon.

  1. In the Modify User settings, turn on Modify Password.
  2. In the Old Password field, enter the reset password.
  3. Enter your new account password.
  4. Re-enter your new account password.
  5. Press OK.

How do I reset my IP camera without reset button?

All you need to do is hold down the power button for about 12 seconds when the power is off, and wait for it to reboot before releasing the power button.

How do I reset my Lorex eco2?

To restore to default settings:
  1. Right-click on the Live View to access the Quick Menu.
  2. Click the Main Menu icon ( ).
  3. Click Advanced.
  4. Click the Maintain tab, and then click Load Default.​ ​
  5. Select the menus to be restored to default settings, or click All to restore the entire system to default settings.

What is the default password for Lorex cameras?

For those who must connect to IP cameras directly without the use of an NVR, the login information below is applicable to most Lorex IP cameras. Default login for most Lorex IP cameras: Username: admin. Password: admin.

How do I log into my Lorex cameras online?

Connect your Lorex system to your router and connect to it over the Local Area Network (LAN). Configure your router or Internet gateway for port forwarding. Create a Lorex DDNS account to create a permanent web address for your system. Connect to your system over the Internet.

How do I reset my security camera password?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I log into my Lorex DVR?

To log in and set up your Lorex Client 11 software:
  1. Launch the Lorex Client 11 software on your computer.
  2. In the IP Address field, enter the DDNS or local IP address of your DVR.
  3. Enter your User Name.
  4. Enter the Password.
  5. Enter the Client Port value (default: 9000).
  6. Click Login.

Can I view my Lorex cameras on my computer?

Launch the L-View Client software. It will automatically search for cameras connected to Local Area Network (LAN) and display each under the Auto search list by camera ID. Double-click your camera ID from the Auto search list to connect the camera. Enter the camera password and click OK.

How do I know if my Lorex is connected to the Internet?

To check the Internet connection settings on an LHV / LNR Series DVR / NVR: Right-click on the Live View to access the Quick Menu. Click Network > TCP/IP. Check your Mode settings.

Why is my Lorex app not working?

If the Lorex Cloud app is not connecting to your cameras, it may be due to a pending firmware update on your recorder. If no newer firmware version is available, please reboot your recorder and wait approximately 10 minutes before attempting to connect with Lorex Cloud again.

How do I connect my Lorex camera to my phone?

Connecting to Your System on Android
  1. Tap Scan QR Code and line up the QR code on the top of your system using the camera on your mobile device.
  2. Name: Choose a name for your system of your choice.
  3. Client Port: Enter the system’s Client Port.
  4. Username: Enter the system’s User Name.
  5. Password: Enter the system’s Password.

What is my Lorex Home account?

A Lorex account enables you to register a free Dynamic Domain Name System (DDNS) and manage your FLIR Systems products. When creating your account, it is recommended to update your account address and register your product warranties.