How do you reset the maintenance required light on a 2013 Toyota Tundra?

Turn the vehicle all the way off. Press and hold the “Trip” button. Continue to hold the “Trip” button, and without starting the engine, switch the ignition to “On.” When the trip meter is set to all zeros, release the “Trip” button.

How do you reset the maintenance required light on a 2010 Toyota Tundra?

► Play

How do you reset the maintenance light on a 2006 Toyota Tundra?

► Play

How do you reset the maintenance required light on a 2008 Toyota Tundra?

► Play

How do you reset the maintenance required light on a 2011 Toyota Tundra?

► Play

How do I turn off the maintenance required light?

How to Reset the Maintenance Required Light?
  1. Turn Your Vehicle on. Your key should be switched to the on position and look on your dashboard.
  2. Turn the Vehicle Off and Press the Trip Meter Reset Button.
  3. Turn the Vehicle Back on.
  4. Keep the Reset Button Pressed.
  5. Release the Reset Button.

How do you reset the maintenance required light on a 2012 Toyota Tundra?

How do you reset the maintenance required light on a 2012 Toyota Tundra?
  1. Turn your key to the “On” notch, and press your trip odometer knob until “Trip A” is displayed.
  2. Turn your key to the “Off” notch.
  3. Wait for the system to reset.
  4. Release the trip odometer knob when “Trip A” is displayed again.

How do you reset maintenance light on Toyota Highlander?

How to Reset the Maintenance Required Light for a Toyota Highlander
  1. Turn the ignition switch to the “On” position but do not crank the engine.
  2. Press the odometer button until the total mileage shows on the display.
  3. Turn the ignition switch off.
  4. Press and hold the odometer button. Turn the ignition on again.

How do you turn off the maintenance required light on a Toyota Highlander 2020?

► Play

How do you turn off the maintenance required light on a Toyota push start?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

Why is my maintenance required light on after oil change?

What ‘MAINT REQD‘ Means. TheMAINT REQDlight comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

Why is my maintenance light on?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.

How do I reset my dashboard after oil change?

► Play

How do I reset my service light?

DIY service indicator reset
  1. Get in your car, close all the doors.
  2. Press and hold the trip reset button on the instrument panel.
  3. Turn the ignition on, all the lights come on but do not switch the engine on or put your foot on any pedals.
  4. This step is where some cars may differ.
  5. Turn ignition off.

How do you reset car sensors?

► Play

Where is the TPMS reset button?

The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely.

Send us a feedback0/500

Do you like this article?
Yes
No