Why are my Skullcandy headphones not pairing?

If your Method Active does not successfully pair to your device, turn the product off. From the off state, hold the power on button for 5 seconds until you see a blue LED and hear “pairing.” Enter your device’s Bluetooth settings and choose Method Active. The product should connect to your device.

How do I reset my Skullcandy ANC wireless headphones?

Solution: A full reset may help. Here’s the simple way to do it. Hold both the upper and lower buttons on the right earcup for ten seconds and watch the colored LED’s. The top and bottom ones will turn yellow for three seconds.

Why are my Skullcandy headphones flashing red?

Where there is under 30-minutes battery life left on a pair of Skullcandy earbuds, then they will start to blink red. There will be a flashing light every 5-seconds. This means that if you do not get to a charger soon, your earbuds are not going to be pumping out sound anymore.

How do I put my Skullcandy Bluetooth headphones in pairing mode?

Activate Pairing Mode on Your Skullcandy Headphones

To activate Bluetooth connectivity, simply press and hold the Power/Bluetooth button for about 4 to 5 seconds. Once pairing mode is activated, you’ll notice the LED light starting to flash.

Why is my right Skullcandy earbud not working?

Hold the back button of the first earbud for 10 seconds, then place it in the case. Hold the back button of the second earbud button for 10 seconds and then place it in the case. Pull both earbuds out of the case to activate pairing mode. Turn your devices Bluetooth back on and pair it to your earbuds.

Why is one of my Skullcandy earbuds stopped working?

Turn OFF Bluetooth and remove your earbuds from the pairing list. Now, take out the left earbud from its case. Touch and hold the center of the earbud until the LED indicator flashes red. This indicates that the earbud is reset.