How do I turn off the lock on my Samsung washing machine?

Push and hold the “Spin” and “Soil Level” buttons for six seconds to disengage the lock. The light will go off. Press and hold the “Signal” and “Soil Level” buttons for three seconds to reactive the child lock.

How do you force a washing machine to unlock?

Simply pull the wire or line sideways, gently but firmly, towards the handle to release the door catch and open the door. If this hasn’t worked or your washing machine handle faces the opposite way you can still release the door catch.

How do you manually unlock a washing machine door?

Why is my washer locked and won’t open?

Turning off the machine at the mains should allow the door lock to cool down and open after a few minutes. The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).

How do you unlock a Samsung front load washer?

How do you unlock a Samsung top load washer?

Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off. If you get stuck, though, you can drain the water from front load washers using the emergency drain hose; once the water is gone, the door will unlock.

How do I reset my Samsung washing machine?

  1. Press the Start/Pause button to unlock the door.
  2. Open the door, then add or remove laundry.
  3. After closing the door, press the Start/Pause button to restart the wash. To change a cycle, you may tap the Pause button and then change the cycle.

What is the key symbol on Samsung washing machine?

Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.

How do you drain water from Samsung washing machine?

Key symbol is to show if the door is ready to be opened or not. When the key is shown in “Red”, it means door is locked, you cannot open. When there is no red light in the key, the door can be opened. My Samsung top-loader does not have a key symbol the door can be opened at any time during the wash.

How do you drain a washer that won’t drain?

Twist the drain hose cap counterclockwise to slowly remove it and drain the water. After the water is drained, remove the filter and clean it with a soft toothbrush. Inspect the filter housing and remove any visible dirt or debris. Reinsert the filter, replace the cap, and turn it clockwise until it’s secure.

Why won’t my Samsung top loader washing machine drain?

What to Do When Your Washing Machine Won’t Drain
  1. Perform a Master Reset. Unplug your washer for about one minute.
  2. Test the Lid Switch Assembly.
  3. See if the Drain Hose is Kinked.
  4. Check the Drain Hose or Pump for Clogs.
  5. Clean out the Coin Trap.
  6. Check the Water Level Control.
  7. Schedule Washing Machine Repair.

Why does my Samsung Washer keep rinsing?

If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

How do you manually drain an automatic washing machine?

Most Samsung washing machines come with different faucets for hot and cold water. If the machine works fine but gets into a loop in the rinse cycle, it could be a sign of some issue with the cold water faucet. If it is clogged, the washer will not get enough water to complete the rinse process, hence the loop.

Where is the filter on a Samsung top loader washing machine?

If not, follow these steps:
  1. Step 1: Turn off the power and lay down towels.
  2. Step 2: Locate the drain hose at the back of the washing machine.
  3. Step 3: Drain the water.
  4. Step 1: Turn off the power and lay down towels.
  5. Step 2: Locate the drain hose.
  6. Step 3: Drain the water.
  7. Step 4: Scrub the filter.

Is there a filter on a Samsung washing machine?

Where is the filter on a top load washer?
  • There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket, under the agitator.
  • During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
  • These filters should never require cleaning or replacement.

Where is the filter on a top loader washing machine?

Samsung washers have two filters – the drain and the fill one. Both perform a protective function preventing the debris to get into the washer during a washing cycle or while filling. If you clean them regularly, the machine functions properly. So you can avoid serious problems requiring a repair work as well.

How do I clean my Samsung top loader?

Top Load Washer – Lint / Pump Filters
  1. There are 2 crescent-shaped Fine Mesh plastic lint filters in the bottom of the wash basket under the agitator.
  2. During drain down and spin, the water forces the lint off the bottom of the filters and down the drain.
  3. These filters should never require cleaning or replacement.