What thickness OSB should be used for flooring?

Wood Products

For decades, 23/32″-thick OSB has been the most commonly used thickness of OSB subflooring. But a simple switch to 7/8″ panels offers several advantages for accommodating a home’s energy efficiency and for ensuring the performance of finish materials and the overall feel of the floor.

Is OSB safe for flooring?

OSB doesn’t work as a floor covering because of: Appearance: OSB is not attractive enough to serve as a floor covering. Not only is the chip-board appearance unattractive, but the surface is also often marked with grid lines and manufacturer markings.

Is OSB strong enough to walk on?

However, osb feels stiffer when you walk across a floor covered with it because there are no occasional weak panels like plywood. Smaller trees can be used to make osb. Wood fiber is used more efficiently in osb. Osb is stronger than plywood in shear.

Is it better to use OSB or plywood for subfloor?

The National Tile Contractors Association and the Resilient Floor Covering Institute both recommend plywood for subflooring and underlayment, because it doesn’t have the risk of swollen edges that OSB does. Plywood also has a slight advantage in stiffness, which means that subflooring panels need not be quite as thick.

What wood should I use for subfloor?

Plywood
Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.

Can OSB subfloor get wet?

Your framing lumber and the oriented strand board (OSB) are going to be fine. The glues used to make OSB are water-resistant because the manufacturers know that virtually no one can build a home that won’t get wet before the roof and siding is applied. … The OSB floors should be swept clean each day after work concludes.

Can you install vinyl plank on OSB?

You can put tile or sheet vinyl flooring over OSB so long as you ensure that the surface of the OSB is completely smooth without any major knicks, knots, or bulging staples. With vinyl being as thin as it is, it must have a smooth base so that the appearance of the vinyl remains very smooth.

What is stronger OSB or plywood?

OSB and plywood offer similar (and sufficient) performance in terms of strength and functionality, though plywood is about 7% stronger. … Plywood will absorb moisture quicker than OSB, but consequently it will also dry quicker.

What is the best plywood for flooring?

Interior plywood is ideal for rooms not exposed to moisture, such as bedrooms, and makes a good subfloor for carpeting, tiles, vinyl, engineered wood laminate flooring and hardwood flooring. Exterior plywood is a better choice for bathrooms, kitchens and any other rooms exposed to water and moisture.

Can you put laminate over OSB?

Laminate floors can be installed directly over concrete, plywood, OSB, parquet, vinyl and tile. The underlayment must be applied to the original flooring surface first, and then the floating floor can be installed.

What can I put on OSB to make it smooth?

If you want to smooth down the surface and edges, apply a resin filler coat with a putty knife. Apply it as thinly as possible. After the resin has dried (about 20 to 30 minutes), sand down the board and the edges with 220-grit sandpaper.

Can I put peel and stick on OSB?

Peel and stick tiles can be installed over almost any type of subfloor, though it is important to properly prepare the floor first to avoid problems with your tile flooring. When installing over existing oriented strand board (OSB), an underlayment must be added between the OSB and the tiles.

Can you install hardwood flooring over OSB?

Hardwood flooring will not stabilize the OSB subfloor, so all movement must be remedied prior to hardwood installation. Ensure that no fasteners are exposed or raised and that there is at least an 1/8-inch gap between OSB subfloor panels.

How do you install OSB over subfloor?

Can LVP be installed over OSB subfloor?

Yes, provided it meets the specifications required for subfloor preparation. Bear in mind that plywood and OSB substrates tend to get ‘roughed up’ during construction, and any imperfections in the surface will eventually telegraph through to the surface of the floor.

What is the recommended underlayment for hardwood flooring?

What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.

Can you put engineered hardwood over OSB?

On average engineered hardwood can be laid over OSB, but it’s NOT the best option for the underlayment. OSB, unlike other options, is prone to expanding when it comes in contact with water, and then never shrinks back to its original shape.

How do you cover OSB floors?

Because of the rough surface of OSB, you will most likely want to finish with a polyurethane coat, which will be extra work, but not only will it be heavy-duty, it will look incredibly glossy and clean with a smooth top. The polyurethane will also be important in the rooms with moisture.