A lasso knot has a lot of uses. Some people call it a Honda knot. A lasso knot, basically, has round shape when you tie it in a stiff rope. It helps you to slide the knot freely along the rope. So, in this article, we will tell you how to tie a lasso in different ways. Read on!

Simply put, you need to make two overhand knots. This is somewhat similar when you tie a shoe knot. So, on one end, you have two overhand knots and on the other, the knot appears in the middle. You must take the other end of the string or rope and then put it through the overhand knot. Make sure you tighten it enough.

How to tie a lasso? Step-by-Step

Many people tie different types of knots. However, to tie a lasso knot, you need some materials and tools. Basically, you can use this type of knot for fishing, especially when you use pellets. You can either make a lassoed 6mm pellet, a banded 6mm pellet, and a haired 8mm pellet. The choice depends on your personal preferences.

Step 1:

Form a loop by bringing the line together. After you have formed the loop, you need to use a shorter tag at the end of the line. Now, bring it back around. Make sure it is inside the loop so that you can form another loop. Here, we will refer it to as a secondary loop.

Step 2:

After forming two loops, you need to thread the tag end and make sure both loops wrap around both pieces of the line. Simply put, it means inside both loop 4-5 times. Don’t go beyond this number. Otherwise, you will have a weak knot, which can cause breakages.

Step 3:

Next, you need to lubricate the knot well. Once done, it is important to pull tight on the end of the tag. Make sure you do this slowly. Otherwise, you will ruin the knot. This tightens up the knot. The next step is to pull the secondary loop tight. Remember, the secondary one is the smaller one. This way, you have one remaining loop.

Step 3:

Pull the end of the tag tighter so that it decreases the size in the remaining loop. So, finally, you have tied the lasso. You can either slack or tight the lasso. It allows you to fish different size pellets. You can use this type of knot to fish pellets. Also, you can use it for any other type of bait, which you can’t hold in place by a tight knot. So, a lasso knot is useful in this regard.

How to a tie a Honda knot in Lasso?

Before we tell you how to tie a Honda knot in lasso, make sure you either use a soft or hard rope. We recommend using a soft rope. Soft ropes, in particular, are good when it comes to knot-tying practice. The technique is the same no matter if you want a lasso type Honda knot or lariat type Honda knot.

Step 1:

You can start by tying an overhand knot. You can do it simply by taking the rope’s tail. Don’t hold the rope sideways. Otherwise, you can cause a crooked Honda knot. Make sure you hold the rope straight in front of you, especially if you want a Honda knot.

Step 2:

Make the loop for the Honda knot in the lasso. It is important that this part has the correct length. You must make it long enough so that you can accurately form a loop. Now, push down the overhead knot.

Step 3:

The next step is taking the tail of the string or rope and then push it through the loop or opening. Again, keep in mind that you need to push the tail of the rope by pushing down on its overhand knot.

Step 4:

Now, pull on the knot in the opposite direction. Here, again, you need to make it push up so that everything goes in line. Once you have a knot snug but it has not been fully tight, you need to shape the Honda knot with your hands. Likewise, you can adjust the size of your knot to either decrease or increase the size of the Honda.


Wrapping up, lasso knot has an incredible history. For instance, cowboys would use the lasso knot to catch cattle. Throwing a lasso knot was important for cowboys and cowgirls back in the days. Even today, people use it for different purposes, including fishing.

In this article, we have told you the best method to tie a lasso. We have told you the basic method as well as about the Honda Knot in the lasso. Remember, you can tie a lasso on the stiff rope because it allows you to make the noose open. This is helpful when you throw it to catch an object or cattle.

What kind of knot is used in a lasso?

A honda knot is the loop knot commonly used in a lasso. Its round shape, especially when tied in stiff rope, helps it slide freely along the rope it is tied around.

How do you lasso for beginners?

What is a cowboy knot?

The cowboy bowline (also left-hand bowline, Dutch marine bowline or winter bowline) is a variation of the bowline loop knot. The cowboy bowline has the working end go around the standing part on the side closer to the loop and results with the working end outside the loop.

How do you tie a rope Hondo?

What is the best stopper knot?

The Figure Eight Stopper Knot is probably the most popular Stopper Knot in use, named as it looks like a Figure 8, it’s in every sailing book. The Figure Eight can also be tied slippery as a temporary stopper knot to help keep lines from dragging in the water.

What is a rope Hondo?

A hondo is the small, even loop, knotted on the end of a lariat. The rope must pass easily through the hondo and the overhand knot which joins the hondo must be thrown evenly so the hondo does not lie twisted.

What is a horn knot?

A “horn knot” is a small piece of equipment used for attaching a rope to a saddle horn.

How do you tie a four strand Rosebud knot?

How do you tie a rope for calf roping?

What is the best lasso rope?

Best Lasso Rope For Beginners
Lasso Ropes Price
TOP PICK: AJ Tack Adult Rodeo Lasso Lariat Rope A great lasso rope from good quality materials. CHECK PRICE
Mustang Headin Ranch Rope A good rope made from cheaper nylon. CHECK PRICE
Apr 25, 2019

How do you rope a cow on a horse?

What breed of horse is best for roping?

Cowgirl Hotlist
  • Quarter Horses. Whether the horse is a registered American Quarter Horse or a mixed quarter horse, they’re the most common horses to be found at rodeos.
  • Other Breeds of Horses. You may also see paints, Appaloosas, Arabians, and mustangs.
  • Broncs.

How do you introduce a horse to a rope?

How do you throw a perfect heel loop?

Why is there a loop behind shoes?

The heel loop is to be used to pull on the athletic shoe without damaging or crushing the heel counter. The heel loop not only lengthens the life of your footwear, but also allows you to keep your shoe fitting snug for longer as well, preventing heel blisters and the destabilizing effects of slippage.

How do you cure roping?

How do you heel a calf?