What generation is a 1988 Toyota pickup?

1984 – 1988 Toyota Truck [Fifth (5th) Generation]

How much horsepower does a 1988 Toyota pickup have?

The naturally-aspirated 2.4-liter produced 102 to 117 horsepower and 132 to 140 foot-pounds of torque, while the turbocharged version produced 135 horsepower and 173 foot-pounds of torque. The 3-liter V6 produced 145 horsepower and 180 foot-pounds of torque.

Are 22R reliable?

The 22R and its fuel-injected upgrade, the 22RE, are legendary for their long life and reliability. They will easily last 300,000 miles without a rebuild if you keep changing the oil as needed and replace the timing chain every 150,000 miles or so. Keep in mind that the 22R only produces about 100 horsepower.

What engine came in a 1989 Toyota pickup?

Engines and Performance

The 1989 Toyota 4×4 trucks were available with inline four-cylinder 2.4L engines, or 3.0L V-6 engines. The four-cylinder could deliver 116 hp with a torque of 140 foot-pounds, while the V-6 was capable of 145 hp at 5,000 rpm, generating 180 foot-pounds of torque at 3,650 rpm.

Can you turbo a 22RE?

If you are considering a supercharger or turbocharger for your 22R or 22RE engine, there are a few things you should know. … You can run a turbo or supercharger on a stock motor with a factory EFI unit, but you must limit the boost to 4-6 lbs.

How much HP can a 22RE make?

A stock 22RE engine puts out around 116 hp and 140 lb-ft of torque.

What is 22RE Toyota engine?

The Toyota 22RE was first introduced in 1982. It was essentially a fuel-injected version of Toyota’s 22R four-cylinder engine. In its original incarnation in 1982, it ran at 105 horsepower at 4,800 rpm. In 1985, the engine was upgraded slightly and a few other minor upgrades were made over the following 10 years.

What does 22RE stand for?

The 22RE was the fuel-injected version of the 22R. The engines remained in production through 1995. A turbo version received a 22RET or 22RTE designation, but only saw production from 1985 to 1988. The 22REC denoted the engine met all California emissions requirements.

What transmission is in a 87 Toyota pickup?

A five-speed manual transmission was standard equipment and a four-speed automatic was optional. The final drive ratio of the rear axle of the four-wheel drive model was 4.875-to-1.

Are all 22RE engines the same?

Mechanically they are the same. However, there are a lot of little differences (intake, throttle body, sensors, exhaust manifold, injectors, wiring harness, vacuum hoses valves). LC engineering has a lot of great info on their site. All Toyota 20R – 22R – 22RE engines use the same crankshaft and connecting rods.

What engine is in a 1985 Toyota pickup?

Both standard and extra cab models featured a 2.4-liter carbureted engine with 103 horsepower. Electronic fuel injection was introduced for the Toyota pickup in 1985, which bumped the horsepower up to 116. The extended cab was able to reach 190 horsepower with a 3-liter engine, and was offered in four-wheel drive.

What year did Toyota offer the 22RE engine?

Toyota Motor Corporation produced the 2.4-liter 22R four-cylinder engine from 1981 to 1995, and introduced its fuel-injected 22RE version in 1982.

What engine is in a 1984 Toyota pickup?

1984 Toyota PICKUP 2.4L 4 -cyl Engine [R] 22R.

Is a 22R and 22RE head the same?

AFAIK they are identical, there is no difference in the heads, in the same year range. The only difference is the cam.

Is 22RE a good engine?

The 22R and RE are by far the most reliable engines Toyota ever built, I had three pickups with both the 22R and RE engines and never had a problem. All of them had well over 200,000 miles on them. When I sold my 92, it had over 350,000 miles on it.

What engine does a 1980 Toyota pickup have?

2.2L four-cyl
This truck is typical of any of Toyota’s 4×4 trucks sold in the U.S. in 1980. It has a carbureted 2.2L four-cyl (20R) engine, a four-speed transmission, a two-speed transfer case, ladder frame, solid front and rear axles, a bench seat, a bed, a cab, and more.

What engine is in a 1992 Toyota pickup?

2.4 L 4-cylinder

3.0 L V6

1992 Toyota Pickup/Engine

What engine is in a 1990 Toyota pickup?

Used 1990 Toyota Pickup Specs & Features
Engine
Base engine size 2.4 l
Base engine type Gas
Cylinders Inline 4
Horsepower 116 hp @ 4,800 rpm

How many liters is a 22R engine?

The 2-valve SOHC 2.4 L (2,366 cc) 22R was produced from 1981 through 1997. Cylinder bore and stroke was 92 mm × 89 mm (3.62 in × 3.50 in). Initial output was 72 kW (97 hp; 98 PS) at 4,800 rpm and 174 N⋅m (128 lb⋅ft) at 2,800 rpm.

What engine is in a 1993 Toyota pickup?

2.4 L 4-cylinder

3.0 L V6

1993 Toyota Pickup/Engine

What are Toyota engine blocks made of?

Toyota AZ engine
Piston stroke 86 mm (3.39 in) 96 mm (3.78 in)
Block material Aluminium
Head material Aluminium
Valvetrain DOHC 4 valves x cyl. with VVT-i

What is a 2Y engine?

2Y. The 2Y engine is an OHV, eight valve construction just like the 1Y. It shares that engine’s 86 mm (3.39 in) bore, but stroke is increased to 78 mm (3.07 in) for a displacement of 1.8 litres (1,812 cc). There are also 2Y-J and 2Y-U engines with differing emissions control equipment. OHV, eight valves.

What liter is a 22RE?

The Toyota 22RE was one of the final engines from the long history of Toyota R family engines. The 4 cylinder 2.4 liter engine manufactured by Toyota was well-known and documented for its reliability.