How much oil does a 3.6 L Dodge engine take?

Engine Oil
Viscosity: 5W-20 (All TEMPS)
Capacity: 5.9 quarts. . . . (with filter)After refill check oil level.
Torque: 20 ft/lbs (Oil Drain Plug)

Is the 3.6 Pentastar a good engine?

The basic engine, however, remained in production for the last few years. So it is fair to say the 3.6 V6 Pentastar is a good reliable engine. It pulls strong with impressive acceleration. It is regarded as among the most reliable high-volume production engines around.

How long will a 3.6 Pentastar engine last?

Well-Known Member. With proper maintenance the 3.6L will EASILY achieve 200 – 300,000 miles with no major repairs. Only thing I know that is a weak point for these engines is the radiator, and that was for the 3.6L in the Jeep.

Which is better 5W-20 or 5W 30?

Because of the thinner viscosity, 5W-20 performs well at lower operating temperature, whereas 5W-30 is thicker and works best in higher operating temperature. The 5w20 would easily flow in cold temperatures (during the winter), but it would thin up in hot temperatures.

How do I get more power out of my 3.6 Pentastar?

How To Get More Power Out of a 3.6 Pentastar (Performance Upgrades)
  1. Cold Air Intake.
  2. Tires.
  3. Catback Exhaust system (10-18HP claimed)
  4. Ignition Coils.
  5. Custom Tune.
  6. BOOST!!!

How much horsepower can you get out of a Pentastar V6?

High Efficiency. The 3.6 Pentastar is a very efficient engine. Despite being naturally aspirated, the Pentastar can produce 305 hp and 370 lb-ft of torque. The Pentastar also delivers almost 90 % of torque at very low RPMs, ranging from 1800 RPMs to 6350 RPMs.

What happens if you put 5W-30 instead of 0w20?

0w20 is a fully synthetic motor oil. 0w being the winter weight, the viscosity of the oil at freezing temperatures. 20 is the finishing weight or how thick it is, when the engine is at operating temperature. 5w30 can be fully synthetic, however, putting it into your engine which is designed for 0w20 is a bad idea.

Is 5W20 good for summer?

5W20 yeah it is like water, good for winter, but not as good in summer, when it gets 110F. Although 5w20 is like water, but it is holding together.

What happens if you mix 5W-20 and 5W-30?

Mixing 5W-20 and 5W-30 (or any other oils for that matter) may lead to faster wear and tear of your engine and eventually cause problems with the basic functioning of critical engine parts. And even if your engine allows it, you won’t get any noticeable results by mixing different viscosity grade oils.

Is 5W-30 oil synthetic?

Keeps engines running like new

Mobil 1™ 5W-30 is an advanced full synthetic motor oil designed to keep your engine running like new by providing exceptional wear protection, cleaning power and overall performance.

Can I use 10w30 instead of 0w20?

Unless you live in Alaska or somewhere about as cold as that, it’s probably not ever gonna be an issue to use 10w30 in place of 0w20. Because in colder climates 0w20 is actually thicker at start up than 10w30 in warmer climates, yet they are quite similar at start up in warmer climates.

Is it OK to use 5W20 instead of 0w20?

Can 5w20 be used? Yes you can use both. 0w-20 just provides better engine protection when starting up in cold cold winters.

What does 10w30 mean?

The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold and 30 when the engine is hot. This is different than an oil labelled 5W30, which has a thinner viscosity when the engine is cold at 5W.

Can I use 5w40 instead of 5W-30?

There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.

Can I put 5W-30 instead of 0W 30?

0W-30 is a special type of motor oil. It has a low viscosity and can be used in place of 5W-30 or 10W-30.

Can I use 10W40 instead of 10w30 in my generator?

Changing from 10W30 to 10W40 will not do any effect on your engine if you choose right one for the right season. Its totally safe you can go for it.

Which is better 10w30 or 20w40?

20w40 is thicker at high temperatures than 10w30 It is desirable for lubrication at operating temperatures to be high. 20w40 is better than 10w30 at normal operating conditions.

Is 10W-30 oil the same as SAE 30?

SAE 10w30 oil has 10w thickness at low temperatures, but SAE 30 is at high temperatures. … In the straight SAE, 30 doesn’t and can have immense Viscosity and helpless pumpability at low temperatures. As SAE 10w30 is not thick in low temperature, while SAE 30 is in high temperature.