When driving in a low-visibility situation you should?

When driving in a low-visibility situation, you should:

Increase your following distance. Drive as if it is a high-visibility situation.

What do you do when you have zero visibility?

In dense fog or other conditions which reduce your visibility to near zero, put on your hazard lights and pull into the nearest parking lot or other safe space. If you are unable to find a safe parking space or parking lot to pull into, pull over on the side of the road as far as you can.

When visibility is limited you should drive at a speed in which?

Wait in a safe area for conditions to improve. Reduce your speed, increase your following distance. Use your headlights, or hazard lights if speed is more than 15 miles below posted limit.

Should you slow down when visibility is reduced?

Because it may be hard for cars behind you to see you, it’s important to brake slowly to give drivers behind you more time to slow down. Being on the lookout for drivers without their lights on. Cars that drive without lights on are even more difficult to see.

When visibility is reduced The first action to take is to?

Whenever visibility is reduced, the first action to take to apply the IPDE process is… To slow down.

What are three things that can limit your visibility while driving?

4 Conditions That Cause Limited Visibility and How to Handle Them
  • Time of day. Too much sun or not enough sun can play tricks on the most experienced drivers. …
  • Weather conditions. Dicey weather conditions like heavy rain, snow or fog are less than optimal. …
  • Direct obstructions to your view. …
  • Poor roadway design.

What is limited visibility?

“Limited visibility” occur in conditions of steep, hill, turns and other obstacles that can obstruct the visibility of the driver. The reason for limited visibility can be high buildings, big truck on the road, trees, turns and other objects on the road that restricted the visibility of the driver. …

When driving and the visibility has been reduced what do you do sun glare?

Slow Down. The first rule of driving through a sun glare is to slow down – way down. Lack of visibility inhibits your ability to react quickly, so going a bit slower can help you avoid an accident. Slow down to the speed you would drive if you were in a rainstorm or driving through thick fog.

When driving under low visibility conditions due to fog you should?

Explanation When driving in fog, you should slow down and use your low beam lights. If the fog is so dense that you cannot see, pull off the road and wait for the fog to clear.

What can be done to reduce the risk of fog?

How to Reduce Risk while Driving in Fog?
  1. Keep Sufficient Distance Between Vehicles: Stop at a safer distance from another vehicle to be on a safer side. …
  2. Use Low Beams: …
  3. Follow the Edge of the Road: …
  4. Check the Wipers: …
  5. Use Hazard Lights: …
  6. Drive Slow.

What steps should you take if you run off the road?

What steps should you take if you run-off the road? Keep a firm grip on the steering wheel. Stay off the brake and gas.
…
  1. Take your foot off the accelerator.
  2. Turn front wheels to point them in correct direction.
  3. Be prepared for a secondary skid in opposite direction.
  4. Turn wheels in correct direction, straighten wheels.

When the road is slippery visibility is reduced what should you do?

This is when many road surfaces are most slippery because moisture mixes with oil and dust that has not been washed away. Turn on your low-beam headlights. Heavy rainfall can reduce visibility to zero. Pull over and wait for the rain to subside, or until visibility is restored.