What size needle should I use to pierce my ear?

Standard ear piercings are a 20g or 18g if they were pierced by a gun. If they were pierced by a professional, the lobe piercing will typically be a 16g or 14g. After a minimum of two months it is typically safe to change the jewelry, but the piercing may still feel sensitive.

What is the normal size of a piercing needle?

18 g
Common Piercing Type

“Standard size is 18 g, which is what I mostly use for all my ear piercings,” Thompson reveals. “For piercings in general, 18 g through 16 g is the most common. For nipple or navel piercings, 14 g through 12 g is most common.

What size is a regular earring stud?

The most common gauges for this are the 16g, 18g and 19g. Next to the Forward Helix is the Helix or the outer rim of the ear that stretches down near the earlobe. Typical earring sizes for this part of the ear are 16g, 18g, 19g and 20g.

Is 14g or 16g bigger?

As the numbers go up the size gets smaller. 14 IS thicker than 16. ALWAYS. … The lower the number, the thicker the gauge so 16g is thinner than a 14g.

Can you go from 20G to 16G?

If your ears were pierced properly at a professional piercing studio, your ears were most likely pierced at 16g, but you should ask your piercer to make sure. You will stretch to a 14g if you are starting at 16g.
…
Size Guide.
Gauge Millimeters Inches
20G 0.8mm 1/32″
18G 1mm 5/128″
16G 1.2mm 3/64″
14G 1.6mm 1/16″

What is a 16G needle used for piercing?

Cheek: Cheek piercings are most often done with 16g to 12g needles followed by starter labrets of the same size. Dermal: Dermal piercings are typically done in smaller sizes, like 18g or 16g.

Can I put a 14g in a 12G piercing?

No worries though- 14 and 12g are interchangeable thread patterns– meaning you can wear all your pretty and fun 14g jewelry with your 12g posts! I know those sizes sound intimidating, but they are worth it for a comfy, happy, easy healing piercing!

Can I put 16G in 14g piercing?

Yes, you can. A 16g jewelry is thinner than a 14g hole so it should go in fine as long as you’re willing to downsize your piercing, possibly permanently.

Is 12G bigger than 14G?

Small gauges will have a thinner bar but a larger number (like 20G), and large gauges will have a thicker bar but a smaller number (like 14G).
…
Inches & Millimeters Gauge Conversion Chart:
Gauge Inches Millimeters
18G .040″ 1.0mm
16G .050″ 1.2mm
14G .064″ 1.6mm
12G .082″ 2.0mm

How many MM is a 10 gauge earring?

2.588 mm
gauge inches decimal millimeters
10g 0.102″ 2.588 mm
0.125″ 3.175 mm
8g 0.129″ 3.264 mm
6g 0.162″ 4.115 mm

Will a 16 gauge earring fit in a normal piercing?

An 18G needle can be used for earlobe piercings, nose piercings, as well as some cartilage piercings (e.g. forward helix). … A 16G needle is used for most cartilage piercings, including the tragus, helix, rook, conch and daith. Shop our flat back earrings and cartilage hoops for cartilage piercings.

Can you put a 18g earring in an 16G hole?

yes you can. When learning about piercings sizes you will know that the bigger the number the smaller the gauge of the piercing so yes you may use an 18g. the 18g is smaller than the 16g. Just be aware though that sometimes user smaller jewelry could cause your jewelry to get accustomed to that size.

What gauge is a daith pierced with?

16 gauge
✨ Like other cartilage piercings, the daith is pierced with a 16 gauge needle, which is 1.2mm thick. You’ll want 16 gauge earrings to fit your daith piercing. If, however, you’ve been wearing earrings with thinner posts in your daith, you may want to try earrings with slightly thinner 18 gauge posts (1.0mm thick).

Can you go from 18G to 16G?

Yes you can, in fact that’s typically what a piercer will do, especially with cartilage piercings. They pierce with a gauge size bigger than the actual jewelry. It allows room for swelling and placing the jewelry.

Is 16 or 18 gauge bigger?

What Does “Gauge” Refer To? The gauge simply communicates the fastener thickness as a whole number, but it gets confusing when looking at the actual ratings. That is because 16 is greater than 18.

Is 16 or 18 gauge wire bigger?

The gauge is the size of the wire. The higher the number the smaller the wire. If your stereo is high power you might want to use 14 or 12 gauge wire for better power handling. Smaller wire 16 gauge or 18 gauge can get warm or hot with high power amps.

How do you increase the size of your ear piercing?

Using Teflon tape and packing it onto your earrings can make it bigger between stretches and makes stretching easier, but is more likely to harbor bacteria that can cause infection. Know when to stop. If you stretch improperly and get a blowout or thin lobes, downsize and do daily oil massages to thicken lobes.

What gauge is a Claire’s cartilage piercing?

First thing – take out the Claire’s jewelry and heal your ear. And Never, Ever get anything pierced there or anywhere similar again. Never, Ever get pierced with a gun, period. Second thing – what size is normal for a cartilage piercing is generally 16g.

How can I make my earrings thicker?

Stretch the earlobe to widen the hole.

To do this, gently tug on the area around the piercing with your thumb and index finger. This should allow your piercing to go right in with little to no pain. Check the front and back of the lobe to see if the hole has widened before inserting the earring.

Can I stretch my ears every 2 weeks?

As a general rule of thumb, you should wait a minimum of 3-4 months before stretching a fresh soft tissue piercing, and healed ear lobe piercings can often be stretched at the rate of one size (about 1mm to 1.5mm or 1/16″) each 30 to 45 days, minimum.

How do you clean gunk out of earring holes?

“Just a little bit of rubbing alcohol on a cotton pad to clean the post and the backing.” Simple, sure, but effective: Rubbing alcohol is a cleaner, a solvent (meaning it can dissolve buildup), and a disinfectant, making it a quick and easy way to remove all that gunk and sanitize the metal.

How long should I wait to gauge up my ears?

4 to 6 weeks
It’s usually recommended that you go up one gauge at a time (expressed in measurements of 2) when moving to a larger piece of jewelry to avoid developing a blowout. Many people also recommend waiting 4 to 6 weeks before increasing sizes. The amount of time you need to wait may increase as your jewelry becomes larger.

Can you sleep with ear tapers in?

You should not use tapers past a 00g! Stretch up using tape. It also is not good to sleep with your plugs in. You heal better without them in.