How do you reset the airbag light on a Subaru?

What can cause the airbag light to come on?

What causes the airbag light to come on?
  • The airbag needs resetting. …
  • Corroded sensors. …
  • Depleted battery. …
  • Dislodged wiring. …
  • Faulty seat belt. …
  • Your airbag clock spring may need replacing.

What does airbag light mean on Subaru?

Make Sure It’s Actually the Airbag Light. … This amber-colored light means that your Subaru detects weight in the passenger seat, but not enough to trigger the passenger airbag in case of an accident.

Is it okay to drive with the airbag light on?

When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired.

How much does it cost to fix airbag light?

Number 1 — Reset Airbag Light

You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.

Can a blown fuse cause the airbag light to come on?

Blown fuses can definitely cause the airbag light to come on. … When the airbag system is malfunctioning, a mechanic or auto parts store should be able to read the code that the system is putting out which will give them a clue as to what particular problem the airbag is having.

Will disconnecting the battery reset the airbag light?

Many air bag computers use non-volatile memory so even removing battery power won’t erase them. It takes a scanner to erase them. But even if you do erase it, whatever turned the light on to begin with will turn it right back on so you accomplish nothing.

Can you reset airbag light without tool?

In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals. Check the wiring system underneath the driver or passenger seat for any loose wires or corrosion in the connector plug. Spray the connector plugs with an electronic cleaner and restart your car.

Will pulling fuse disable airbag?

Every vehicle I’ve worked on has had an airbag fuse you can remove from the fuse panel to fully disable the airbag; the repair manuals recommend pulling this fuse when doing any work in the dash area since there’s some risk of triggering the airbags to go off while you’re working, which could result in serious injury …

Will removing airbag fuse turn off airbag light?

In most cases, removing the airbag fuse will not disable the airbag. That’s because the airbag system or the entire SRS are meant to make sure that they will almost always work in any kind of situation.

What happens if you remove airbag fuse?

If it has a fuse, will removing it disable the airbag? In most cases, removing an airbag fuse does not disable the airbag. This especially happens if the airbag deploys even when the power that drives it is cut off. You may have to figure out another way to disable the airbag.

Is there a fuse for air bags?

The airbag in your vehicle likely a fuse but the fuse does not activate the air bags. Additionally, if your service airbag lights are on, your entire system will be inoperative.

Is it illegal to disable airbags?

It is illegal for a mechanic to disable a bag, unless permission has been obtained for that vehicle from the National Highway Traffic Safety Administration, but it has always been legal for a car owner to do so.

How do you disarm an airbag?

But the passenger airbag can be deactivated if the car is equipped with a Passenger Airbag Cut Off Switch (PACOS). In most cases, to disable the airbag you need to have the ignition switched off to avoid any possible malfunctions. The PACOS is usually located in the passenger side of the dash board.