How do I lock a configuration menu in aqualogic?

How do I reset my Hayward Aqua Plus?

With the pump running, take the power switch down to the “Off” position, and then back up to “Auto”. You should hear a click within 10 or 15 seconds. When you do, press the diagnostic button five times in a row. The system will go through a recalibration process.

How do you reset the logic on a Hayward Pro?

You must reset the system by entering the ‘Diagnostic Menu’ and then hitting the right arrow key once and then pushing the plus key once. This should reset the light and message.

How do I update my aqualogic software?

The USB memory stick must be plugged into the side of the Local Display behind the deceased Front of the OmniLogic. Next, you will be able to upgrade your firmware by going to OmniLogic’s Configuration Menu. With the new firmware, the OmniLogic will automatically start up again.

How do you unlock the configuration menu on Hayward Aqua Plus?

Press the ‘Menu’ until, ‘Configuration Menu-Locked’ appears. To unlock, press and hold the (<) & (>) until the text, on the display, changes from ‘Locked’ to ‘Unlocked‘ (unit will beep).

How do I reset my Hayward Turbo Cell?

If the Inspect Cell Light is the only LED light flashing, then you can reset it by simply holding down the diagnostic button for 3 seconds, then release. The Inspect Cell indicator will now reset and will later come back on after another 500 hours of use.