How do you respond to steering failure?

If your steering fails, you will need to stop as soon as it is safe to do so. If you are in an area without much traffic and conditions are dry, brake as quickly as possible. If it is wet or icy, try to pump your brakes and downshift to avoid skidding, since you won’t be able to steer to correct a skid.

What should you do when total steering failure?

If you have experienced total steering failure, you must stop the vehicle without pulling over. The key to doing this safely is to slow-down as gradually as possible, while activating your hazard lights. This will give other drivers enough time to react and avoid your vehicle.

What actions should the officer of the watch take when the ship’s steering gear fails?

In such cases the crew should be vigilant and adequately trained to handle a steering gear failure situation, taking the following emergency actions: Call the master and advise engineer officer on watch. Report to the office, inform port authority and fix vessel’s position and time of failure.

What would you do if your vehicle’s power steering suddenly failed quizlet?

Bring the vehicle to a stop and turn off the engine. If the power steering fails because the engine has stopped, you should: Grip the steering wheel firmly as steering will be difficult. Stop the vehicle.

What is the correct response when your vehicle starts to skid?

Most skids occur when conditions are slippery. If you find yourself in a skid, take your feet off the pedals. Stop braking and stop accelerating. Then, quickly turn the steering wheel in the direction you want to go.

What happens if power steering fails while driving?

If My Power Steering Goes Out When I’m Driving… Remember that turning will take a lot more effort than you’re used to, and also remember to brake gradually: Slamming the brakes could send the vehicle into a tailspin, and without proper steering controls you’ll have no way to straighten it out.

What should you not do if your vehicle starts skidding quizlet?

Do not brake. Keep your eyes pointed in the direction you want to go, and you will automatically steer there. Keep the front tires aligned with your intended path. To avoid skids, smoothly apply your brakes and accelerator, and turn slowly and smoothly.

What happens when steering is applied too hard or too quickly?

OVER-STEERING – Turning the wheels too sharply can cause the back end of the vehicle to slide out. OVER-ACCELERATION – Supplying too much power to the drive wheels can cause them to spin. DRIVING TOO FAST – The most serious loss of traction results from driving too fast for the conditions.

What should you do when you begin to skid quizlet?

What should you do when you begin to skid? Turn the steering while in the direction in which the rear end of the car is skidding. Reduce pressure on the gas pedal.

Which of the following can result in skidding?

A skid happens when the tires lose their grip on the road, which can be caused one of four ways: Driving too fast for road conditions. Braking too hard and locking the wheels. Turning the wheels too sharply.

What should you do when your vehicle hydroplanes quizlet?

If your vehicle starts to hydroplane, slow down gradually; don’t apply the brakes. Ice and packed snow on the road can cause the car to skid, especially if you’re driving fast or heading downhill. If you go into a skid, ease off the gas pedal, stop braking, and turn the steering wheel in the direction of the skid.

What should you do if your car hydroplanes quizlet?

What should you do if your car hydroplanes? Gently ease your foot off the gas until the car slows down. Your tires should touch the road soon thereafter. If you need to brake, do it gently by pumping the brakes.

What are 3 factors that can cause a loss of traction?

CAUSES OF SKIDDING AND LOSS OF TRACTION. The causes of skidding (loss of traction) can be divided into three groups: (1) conditions of the road, (2) conditions of the vehicle, and (3) actions of the driver. Ice, snow, or frost.

What factors affect traction?

These are the main factors that affect traction while driving:
  • The material the road surface is made from. …
  • The condition of the road. …
  • The condition of your tires. …
  • The weight of your vehicle. …
  • The balance of your vehicle.

How do you correct a rear wheel acceleration skid?

Accelerate. Explanation To correct a drive-wheel braking skid, you should first remove your foot from the brake pedal to allow the locked wheels to begin rolling again. Quickly steer in the direction you want to go, then countersteer to prevent your vehicle from skidding in the opposite direction.

What three steps can you take to check traction while driving?

How can traction control your vehicle?
  1. Adjust your seat to a comfortable position.
  2. Snap the metal fitting on the end of belt into the buckle.
  3. Adjust the shoulder part of safety belt across your chest.

What is the number one reason for loss of traction on the road?

1. Substances on the road – substances on the road can reduce tractions (be alert for things like sewer covers, paint, wet leaves, etc.) 2. Surface conditions – poor road conditions such as rippled surfaces or potholes contribute to loss of traction.