How much does it cost to side a house with hardiplank?

Average cost: $1,500 – $9,000

Hardie board siding costs anywhere from $1 to $6 per square foot of material installed on a home. If you were to replace siding on an average size home of 1,500 square feet, you could expect to pay anywhere from $1,500 to $9,000 in total installation and replacement costs.

How much does it cost to Hardie a 2000 square foot house?

Putting up Hardie Board siding on a 2,000 sq. ft. house costs $14,000-26,000. The cost is notably higher compared to other types of siding, since James Hardie is considered a premium quality product among other fiber cement and engineered wood siding options.

How much does it cost to put fiber cement siding on a 1500 sq ft house?

Fiber cement siding costs anywhere from $2.45 to $12.85 per square foot to install. If you were to replace siding on the average 1,500 sq. foot home, you could expect to pay between $3,675 on the low end and $19,275 on the high end in total installation costs.

How much does Hardie plank siding cost to install?

Hardie Board siding materials cost $3 to $6 per square foot, and the labor cost to install is $3 to $7 per square foot. Old siding removal adds $0.25 to $1 per square foot when residing. Get free estimates from siding contractors near you or view our cost calculator below.

Is Hardie board more expensive than vinyl siding?

Vinyl siding is nearly always less expensive than fiber-cement siding both in terms of the product and labor costs since it can be installed faster. Still, any cost savings may not be reflected in the eventual sale of your home: For resale value, HardiePlank is the better choice.

Is Hardie siding worth?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

Can I install Hardie siding myself?

Fiberboard cement siding can be hand-nailed, but because it’s so much harder and more brittle than wood, you have to predrill holes near any edge. You can save yourself a bunch of time by using a pneumatic coil siding nail gun.

How many Hardie boards do I need?

Boards are most commonly sold in 12′ lengths, though 16′ and 20′ lengths can often be ordered. Divide the linear footage by 12′ to find the number of boards needed to cover the wall. For example, installing 21 courses of siding on a 20′ wide wall will require 420 linear feet of siding, or 35 boards.

How long does James Hardie siding last?

The Hardieplank lifespan.

As a result, it has the same durability as brick or stone. And just as with a brick or stone home, Hardieplank siding should last for the life of your home. James Hardie offers a 30-year warranty on their product, which shows just how confident they are in the long life of their product.

Can you nail through Hardie board?

Hardiplank siding can be hand nailed or fastened with the use of a pneumatic tool. Set your air pressure so that the fastener is driven snug with the siding surface.

Do you nail or screw Hardie board?

What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.

Can you screw into Hardie board siding?

HardiePlank® lap siding may be used with fasteners approved by ICC-ES ESR-2290 spaced in accordance with the Wind Load Tables. Fasteners must be corrosion resistant, galvanized or stainless steel. … Fasteners shall be installed between 1 in. and 3/4 in.

Do you need insulation under Hardie siding?

Hardie Plank is a cement board; it’s composition is sand and water. It is heavy on the wall and provides no insulation value. Formed to resemble wood, it fails to provide a deep, rich grain and does not come close to the look of wood. It is highly susceptible to mold and mildew.

Should Hardie board be caulked?

APPLICATION: General: James Hardie believes it is good building practice to seal the joints to prevent moisture, such as wind-driven rain and snow, from penetrating the wall cavity. Caulking around windows, doors, eaves and trim edges gives added insurance that leaks will not occur.

Is Hardie board waterproof?

HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops.

How often do you paint hardiplank?

every ten to twenty years
Hardie Plank is also called fiber cement siding. While it’s far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

Does Hardie siding Add R-value?

The house above shows how rigid foam insulation, HardieWrap® weather barrier and James Hardie® siding can eliminate air leakage and increase the whole wall R-value when properly installed, significantly decreasing energy costs.

Can hardiplank be installed over existing siding?

Does Existing Wood Siding Need to Be in Decent Condition to Cover With Hardie Board? Absolutely. It is very important that, in addition to being flush and flat, wood siding needs to be in decent condition to be covered with Hardie board.

Can you pressure wash HardiPlank?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding.

Do termites eat Hardie board?

Hardie Board siding resists pests including termites and carpenter ants. It’s also woodpecker resistant, so you don’t have to worry about the hassles of repairing termite or woodpecker damage.

What brand of paint does James Hardie use?

We’ve used Sherwin Williams Emerald paint on Hardie Board and had good success. Sherwin Williams “Emerald” is their top of the line acrylic latex exterior paint. Sherwin-Williams Loxon Masonry Primer can be used to prime Hardie Board before painting.