What chemicals do you put in a pool for the first time?

Chemicals Needed for Pool Start Ups
  • Stain & Scale Preventer.
  • Granular Shock Chlorine.
  • Chlorine Tablets.
  • pH Increaser and/or pH Decreaser.
  • Alkalinity and/or Calcium Increaser.
  • Cyanuric Acid (Stabilizer)
  • Algaecide and Clarifiers if needed.
  • Complete Test Kit or Test Strips.

How do you start a pool for beginners?

How to Open a Pool
  1. Step 1: Clean up debris and check for wear and tear. …
  2. Step 2: Inventory your pool chemicals. …
  3. Step 3: Remove the Cover. …
  4. Step 4: Inspect the Pool. …
  5. Step 5: Fill Pool to Middle of Waterline Tile and Do Final Debris Removal. …
  6. Step 6: Turn on the Pool Filter and Test the Water.

Should I shock my pool when I first fill it up?

At first you’ll add chlorine in what’s called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning. … Now it’s time to keep the water hardness in check, otherwise known as alkalinity.

How do I start my pool pump for the first time?

How soon after filling a pool Can you swim?

Wait about 20 minutes after adding balancing chemicals to your newly filled pool, and you should be good to swim. Calcium chloride – If you have hard water issues, it’s advised to wait about 2-4 hours before swimming after adding calcium chloride to soften your pool’s water—or until one filter cycle has been completed.

How much chlorine do I add to my pool for the first time?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

How do you set up a new pool?

What to do after pool is filled with water?

What Do You Do After an Above Ground Pool Is Filled With Water?
  1. Step 1: Learn about how to prevent drowning and pool chemical injuries. …
  2. Step 2: Turn on the filter. …
  3. Step 3: Vacuum and skim off debris. …
  4. Step 4: Test the water, and then test it again. …
  5. Step 5: Enjoy your pool, but safely!

Why is my pool green when I just filled it?

Your first instinct when you fill your pool with new water, is to shock it. But that shock then oxidizes the metals, that chemical reaction then causes the green hue in your water. This is common with refills that used well water or even water that hasn’t been shocked but instead contains a high level of metals.