What setting to put Scotts spreader on?

For a pushed broadcast spreader, Scotts recommends a setting of 2 1/4 when overseeding and a bare-lawn setting of 4. For application with a handheld broadcast spreader, use a setting of 3 when overseeding and 4 when planting a bare lawn.

What number do I set my Scotts broadcast spreader to?

Turn the dial clockwise for a higher setting. This is good for larger granules of fertilizer, as the opening which the lawn fertilizer will be passing through is larger. On a Scotts spreader, a high setting would be 12 or 14.

What setting should my spreader be on?

Set your spreader so that it’s ¾ open when engaged. If, for example, the spreader is calibrated 1 to 20, set it at 15. Place eight pounds of Milorganite into the spreader’s hopper. This is about one-fifth bag, or 8 lbs., of Milorganite, which is equivalent to 24 cups.

What do the settings on a spreader mean?

A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. … In general, the smaller you set your spreader setting the smaller the hole and the slower the material releases from the hopper.

What are the numbers on Scotts Turf Builder?

The fertilizer analysis is 28-0-3 or 28 percent nitrogen, no phosphorous, and 3 percent potassium. Scotts Turf Builder with Summer Guard not only provides insect protection for a lawn but also helps strengthen turf against heat and drought. The active ingredient for insect control is bifenthrin at .

How do I set my fertilizer spreader?

What do numbers on spreader mean?

The numbers stand for an application rate. A bag of commercial fertilizer will usually have numbers for where to set either broadcast or drop spreaders to get the recommended amount of fertilizer laid down. The numbers on the bag may be different for various brands of spreaders.

How do you set a Scotts drop spreader?

How do you read a fertilizer spreader?

What setting should I use on Scotts spreader for lime?

Pelletized lime should be applied every other year (approximately 15 lbs./1,000 ft²) once you have your soil pH to its optimum level, which is between 6.0 and 6.5.
…
Lime.
Spreader Setting
Prize Lawn (Broadcast) 5
Prize Lawn (Drop) 11.5
Central Quality (Broadcast) 600B, 700, 100A 7
Central Quality (Drop) 175, 185, 205 12

Can you use Scotts drop spreader for grass?

Use the Scotts Turf Builder Classic Drop Spreader to apply grass seed and fertilizer in spring, summer or fall. The large hopper holds up to 10,000 sq. ft. of Scotts Lawn Care Products and is fully assembled.

How do you adjust the spreader on a lawn?

Can too much lime hurt your lawn?

Using too much lime on your lawn will remove the acidity from the soil, but it will also make it too alkaline for your grass to thrive. This will cause yellowing grass that is also not able to absorb vital moisture and nutrients from the soil around it.

How do you use lime spreader?

A spreader is the best tool for applying lime. Apply half of the recommended amount of lime by walking back and forth horizontally with the spreader, then add the second half by walking vertically. This way, your criss-cross pattern ensures the grass is evenly and completely covered.

Does lime need to be watered in?

Lime also needs water to create a reaction in the soil, so if soil is dry it takes longer to see any improvement in your lawn. Even under perfect moisture conditions, it can take up to one year before you see results. If your soil pH is extremely low, you may start to see results in a few weeks.

How do I know if my lawn needs lime?

If your grass is yellowing, dying in patches, or grows weakly despite your lawn care efforts, there is a very good chance you need to add lime. Soils become more acidic over time, due to natural nutrients being pulled from the soil by factors such as water runoff and application of certain fertilizers.

Should I apply lime before rain?

Only apply lime before rain if the expected rainfall is light and brief. Heavy rain or extended periods of rainfall can saturate your soil with water, causing lime to run off your lawn and be wasted.

Can I put lime down at the same time as grass seed?

Sowing Grass Seed

You can apply lime at the same time. … Apply lime in early spring, seed new lawns or over-sow existing ones in fall and apply lime again in early spring. This method works well for soils that are significantly acidic.

Can you put lime and fertilizer down at the same time?

To save you time (and likely money), it’s okay to apply lime and fertilizer at the same time. The fertilizer will provide an immediate supply of nutrients to the soil, while the lime will release slowly over time and maintain the appropriate pH balance.

Should you put lime on your lawn every year?

Applying lime when it’s not needed or applying too much can harm lawn grasses instead of help them. If your soil is overly acidic, you should retest every year until proper balance is restored. Established lawns should be tested every three to four years.

Which lime is best for lawns?

Calcitic lime is the preferred type, thanks to the added plant benefits provided by the calcium. There are several types of calcitic lime products available, including agricultural ground limestone, pulverized limestone, and pelletized limestone.

How soon can cattle graze after lime?

Thus, ground limestone can be spread at any time and pasture fields can be limed in rotation. Grass can be grazed as soon as the lime has been washed off the leaves by rain. If the lime advice for grassland exceeds 7.5 t/ha ;initially only this amount should be applied, and the remainder applied after two years.