What is the minimum working height before fall protection is required?

2 metres
All sites are different, but generally speaking, 2 metres is the key point at which systems are required. If the height is 2 metres or more, then height safety systems are required. Similarly they are required if working within 2 metres of a fall edge.

What is the minimum height that requires the use of fall protection equipment?

2.2. 7 A fall protection equipment shall be used when working in a height of 2 meters and above. For work height of 10 meters, workers are required to use fall arrest equipment.

What is the general industry standard for fall protection?

For general industry, OSHA requires fall protection beginning at a height of four feet. In construction, fall protection is required above six feet. Protection must also be provided any time an employee must work above hazardous equipment or machinery, regardless of the distance.

What is the trigger height for fall protection?

Four feet
Four feet above the ground or a lower level is widely understood among general industry employers as the “trigger height” that requires you to take action to protect your employees from fall hazards.

At what height do you have to wear a harness?

OSHA requires workers to wear a full-body harness, (one part of a Personal Fall Arrest System) when they are working on a suspended scaffold more than 10 feet above the working surface, or when they are working in bucket truck or aerial lift.

What is the minimum height for working at height?

Working at Heights — Any work at height of 1.8 meter or more from the ground level or floor.

At what height does OSHA require guardrails?

42 inches
However, in OSHA applications, the elements are most likely horizontal rails. So, the term is appropriate. A guardrail is required once there is a 48-inch drop. As opposed to the requirements of handrail system, a guardrail must be 42 inches in height – plus or minus 3 inches above the walking surface.

At what height is fall protection required on scaffolds?

10 feet
The standard requires employers to protect each employee on a scaffold more than 10 feet (3.1 m) above a lower level from falling to that lower level.

What is in general required of employers?

Provide a workplace free from serious recognized hazards and comply with standards, rules and regulations issued under the OSH Act. Examine workplace conditions to make sure they conform to applicable OSHA standards. Make sure employees have and use safe tools and equipment and properly maintain this equipment.

What is the height of a standard railing?

42 inches
(1) A standard railing shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level.

How tall are guard rails?

42 inches to 45 inches
(a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.

What is the minimum height of edge protection?

1100mm
Building Regulations part K

This edge protection needs to consist of at least two horizontal rails and have a minimum height of 1100mm.

What is the maximum height of a guardrail?

According to OSHA, the top edge height of top rails (or equivalent guardrail system members) must be 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface. The top edge height may exceed 45 inches (114 cm), as long as the guardrail system meets all other criteria.