Why is my GE refrigerator not making ice?

The refrigerator and icemaker must be at the proper temperature. … If the temperature in the freezer is too warm, ice cubes will take longer to form or may not form at all. Try adjusting the freezer temperature a little lower. A low food load in the freezer can affect the production of ice.

How do I force my ice maker to cycle?

How do I get my GE refrigerator to make ice?

How do I reset my ice maker?

Turn The Ice Maker Off and On Again

This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.

Why isn’t my ice maker filling with water?

Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. … When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.

Where is the reset button on ice maker?

The reset button is on the right side of the ice maker – it is a clear, rectangular, rubber button. Press and hold the reset button. For 2010 models or newer: You will hear a chime when the reset begins. For 2009 or older: Press and hold the reset button for a full 10 seconds.

Will unplugging my fridge reset the ice maker?

Leave the refrigerator unplugged for 5 minutes. This will allow the ice system to reset. After 5 minutes, replug the refrigerator and turn the switch back on. This should cause the ice maker to start working again.

Why ice maker stops making ice?

Cause: A common cause for a clog is frozen water in the line. … Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).

What is the feeler arm on the ice maker?

The feeler arm is the sensor inside the ice maker that stops it from making too much ice. It alerts the ice maker when the ice tray is full. If the feeler arm is stuck, it won’t be able to adjust itself according to the ice level in the tray. This will make the ice maker think that the tray is full when it isn’t.

How do I force my Frigidaire ice maker to cycle?

How do I unclog my ice maker?

Apply heat with a hairdryer to the ice maker fill tube, which is usually a white, rubber-like hose. Hold the nozzle of the hairdryer at the front of the ice maker so that the heat will blast into the fill line. Set the hairdryer to its lowest heat setting to avoid melting the plastic lines and parts of the ice maker.

Can water filter cause ice maker not to work?

While a clogged water filter could be the cause of your ice maker not working, there are more common causes. … If there is ice blocking it, then the ice maker will get the message it should not be producing more ice. Check the water supply to make sure it is going from the fridge to your freezer.