What can I cover my well with?

Plant Around The Well Cover

Ornamental grasses can work well for this option. Most grasses grow several feet tall and can, therefore, hide the well cover completely. Alternatively, you can plant a flower garden around the well cap. Building raised beds around the cover is a great option too.

How do you cover a water well?

How do I cover my well?
  1. Plant Around The Well Cover.
  2. Add Garden Structures.
  3. Apply Positioning Techniques.
  4. Use a Potted Plant.
  5. Lay a decorative stone.
  6. Outdoor building.
  7. Put a fence around it.
  8. Don’t plant trees beside the cover.

What do you cover a well pump with?

Aluminum and fiberglass are the most common choices. You’ll also need to heat the inside of your pump cover, especially if you’re in a colder climate.

Is it OK to cover your well?

DO NOT use any well coverings.

Even though the sight of your wellhead may not be your favorite thing, you should not cover it up with any fake rocks, gravel, treated wood, or wishing wells.

How do you cover an old water well?

What is a well cap?

The well cap seals the upper end of your well to prevent contaminants from entering the well. The watertight well cap covers and encloses the top of your well casing, while the top of the cap can be removed to service the well.

Do wells need to be vented?

Well Cover & Cap Requirements & Well Cap Venting: Water wells require a water-tight cap or cover to prevent contamination from surface runoff or flood waters. But some well caps also require an air vent. … We describe the parts of a water well and its piping and controls including the pitless adapter.

Will well water freeze?

The water inside the well cannot freeze since it is always below the frost line. So the only parts that can freeze are the portions of the water supply pipes that are located on the surface, and the pump, if the well has a jet pump that sits on the surface above the well.

Should well pump be covered?

In short, the answer is YES. Well pumps play a vital role in delivering water from the well to where it is needed. Properly covering expensive well pump equipment with a pump cover or enclosure protects it from the elements, weather and potential vandals. Keeping equipment covered can also help extend its life.

How do you find a well cap?

Locate the wellhead in your yard. This is the top of your well. There should be cap or seal on the top of the casing (pipe) that should extend at least twelve inches above the ground to keep contaminants from entering the system. Soil should slope away from the wellhead so surface water doesn’t puddle.

How do you seal a well cap?

Can you bury a well head?

AVOID BURYING THE WELL HEAD UNDERGROUND

When a well head is buried under ground, it is at greater risk of surface water infiltration and water being exposed to nearby sources of contamination like road salt, pesticides, fertilizers, oil and even gasoline.

How do you install a water well cap?

Should well cap be tight?

A properly installed well cap separates potential pollutants from your drinking water. The cap, which should be sealed tightly at all times, keeps out everything from liquid contaminants to bugs that can crawl inside a well and wreak havoc.

What does a sanitary well cap look like?

A “sanitary” well cap (sometimes referred to as a “vermin-proof” well cap) looks similar to a standard well cap but usually has bolts on the top of the well cap as shown in Figure 2.

How do you seal a well casing?

5 Tips for Sealing a Water Well
  1. Go the depth. Be sure to extend the seal down to the first impermeable sediment layer. …
  2. Mind the gap. To create an effective seal, make sure the borehole diameter is at least two inches greater than the casing diameter. …
  3. Use neat cement. …
  4. Create a berm. …
  5. Wait to install the water pump.

How do you seal a water well casing?

Properly sealing a well casing involves filling the annulus with a material that will stop water from flowing down the side of the casing. The process of filling the annulus is called grouting.

Why is water coming out of my well cap?

If there is water standing around your well it indicates you have a leak. The leak is typically in the water discharge pipe (pipe from your well to the water system). … If you have plastic pipes, the fittings sometimes break causing a leak. The breakage is often caused from the movement of the ground.

Can PVC be used for well casing?

PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due to its outstanding physical and mechanical properties, PVC is the predominant and preferred material used for water wells.

How do you install a PVC well casing?

What is well casing made of?

carbon steel
Casing is typically made from carbon steel, but as the primary structural component of the well the grade of steel used to make the casing, and the specifications of the finished material, are very important.