What is the correct way to measure a window for blinds?

How do you know what size blinds you need?

Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.

What size blinds do I need for a 35 inch window?

The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.

How much smaller should blinds be than the window?

Not Adding Width To Outside Mount Blinds

We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.

What is the standard window size for blinds?

36 to 72 inches
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.

How do I measure a window?

  1. Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece)
  2. As with the width, take three measurements: down the left side, right side and the middle.
  3. Record the shortest measurement — this ensures that the new window will fit.

Should blinds be same width as window?

To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.

How do I know what size mini blinds to buy?

Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.

How much space do you need on each side of blinds?

Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

Should blinds be flush with wall?

1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.

How are pull down shades measured?

How far should Window blinds be from window?

As a general rule: 2″ horizontal blinds such as faux wood blinds and wood blinds need at least 1.5″ inches and 3″ for a flush mount. Honeycomb Shades for instance require less space needing just under 1″ depth and 2″ for a flush mount blind.

How much room do you need for inside mount blinds?

3⁄4″ is the minimum depth required for inside mount blinds.

Are blinds better inside or outside recess?

Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.

Do blinds go against the window?

Measure the width of the window at the top, middle, and bottom. Purchasing Blinds:After measuring the window outline, you can pick your blinds which best suits to your room. … And for inside mount, the brackets should be put up against the inside top corner of each side window.