【How-to】How to apply tint

Can I use soapy water to apply window tint?

Just mix water and a small amount of liquid soap in a clean spray bottle. Professionals recommend baby shampoo or dish soap without any kind of grease-cutting agent as this may interfere with film adhesion. Rear windows have compound curvatures that render the application of window tinting film more difficult.

Is it easy to apply tint?

Having a professional install window tint is easy and not very time consuming, but it can be an expensive undertaking. Thankfully, the process to tint windows at home is not terribly difficult, but there are some things to keep in mind along the way.

Can you apply tints yourself?

Run the squeegee along the top of the window, pushing any air and water out of the top as you go. Roll up the window and spray the film again with application solution. … Repeat this process for all windows until the job is complete. For the cost of a few basic tools and materials, a DIY car tint is a worthwhile project.

Does Window Tint go on the inside or outside?

Is the tint applied on the outside of the window? No. In most cases, window film is installed on the inside of the glass. This allows for maximum durability.

How dark should I tint my windows?

If privacy is your purpose for tinting, a 20% tint is an excellent choice. You can see through windows with a 20% tint if you’re up close, but it’s still difficult. Typically, it’s enough to deter snoopers, though. When vehicles come with a factory tint, it’s usually between 15% and 20%.

How warm does it need to be to tint windows?

between 40 and 98 degrees Fahrenheit

Apply the film in a dust-free, well-lit, shaded place. Apply the tint when the air temperature is between 40 and 98 degrees Fahrenheit (4.4 and 36.7 degrees Celsius). Be careful not to crease the film. Wet your fingertips to avoid getting fingerprints on the film.

What happens if I roll down my window after getting it tinted?

A common question from customers who have just put tinted windows on their car, is “Why Can’t I Roll Down My Windows After Tinting?” The answer is that the adhesives holding the tinted window film in place take time to dry, and until they do, friction caused by rolling down the window could scrape film from the glass.

Does tint get darker after a few days?

The tint on your window does appear to get darker over the first few days or weeks after installation, but the key word here is “appear”. In actual fact, the tint remains the same shade. It’s the adhesive that changes. From there on out, your tint will ever so slowly get lighter as a result of sun bleaching.

Can you roll down windows after tinting?

After you have your windows tinted, it’s essential to wait a minimum of three to four days before you roll down your windows. Window tinting involves the application of a sheer film to the windows, and the specialized adhesive will take a few days to dry.

Will bubbles in tint go away?

It’s common to see small bubbles under freshly-installed tint. Normally, these bubbles should go away within a couple of weeks and should be very small. They may take longer to go away in cold weather and vanish faster in heat. … Excessive bubbling is probably a sign that your tint needs to be redone.

Can I wash my car after tint?

Yes, you can wash your car after getting the windows tinted. The tint is applied on the interior part of the windows, and a car wash will clean your vehicle’s exterior! However, don’t wash or clean the interior part of the window just after it’s tinted. The window cleaning process is simple.

Does rain affect new tint?

Can Rain Affect A New Window Tint? … And, as the tint is on the inside of your car’s windows and not the outside, and the windows are closed, the rain can’t get into your car and it won’t mess up your new tint. Tinting is, providing you do as you’re instructed, completely rainproof.

What are tint fingers?

Why is my tint peeling?

Auto glass tints can peel when the glue dries out and hardens due to sun exposure. If this is the case, the tint film can be entirely reapplied, selectively replaced, or repaired. If the peel is small enough, then sectional replacement is the best option.

Can I roll my windows down 3 days after tint?

It takes some time for the tint to dry off against the glass surface. In case you roll down the panes too early, chances are high that the tinted coating would peel off. This is why seasoned professionals recommend car owners to wait for approximately three to four days after getting it installed.

Why does my tint have bubbles?

Why They Occur

Sometimes, bubbles occur as a normal part of the application process, as water gets trapped in between the window and the film. If these don’t disappear within two weeks, it’s a sign of poor application. … Bubbles can also occur when the tint is starting to break down or the adhesive is beginning to fail.

Why is my back window tint bubbling?

What Causes Window Tint Bubbles? Window tints are bubbly because of the water trapped between the window and the dye. Bubbles in the window tints are normal after a few hours of installation. … Bubbling can also occur if your window tints are losing its adhesive properties.

How do I remove window tinting?

To quickly remove old window tinting, simply grab a hair dryer, and heat the tinted window starting from the edges. Once it is heated, start peeling off the old tint. Repeat the process until the entire tint is completely removed. You can also use liquid dish soap.

How long does tint last on a car window?

Window tint can effectively last anywhere from one to ten years. This drastic range in lifespan is dependent on the brand and product you select, the quality of the installation, and how well it is cared for.