How do I know my fascia size?

The remaining height of the street side face of the fascia board can be determined by deducting the thickness of the bevel cutoff. Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch.

What size wood is used for fascia board?

You construct fascia boards out of 1-by lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight.

What is the best material for fascia boards?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

Can I use 2×4 for fascia board?

Install 1×6-80“ fascia boards to the 2×4 trusses. … Install the fascia so the bottom edge of the roof sheathing will rest on the beveled edge. Install 22-1/2″ long 2x4s between the trusses to support the fascia boards where they butt.

What is the best wood for fascia?

Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.

How do I install fascia board by myself?

Do you install fascia before roof sheathing?

When sheathing a roof, the first step is to snap a line so that the first row goes on straight. But if you snap it at 40 inches, then the sheathing will not project over the subfascia or true fascia. … Add an inch and a half for subfascia, strike a line. Add the thickness of the true fascia, 15/16 in., in this case.

How do you install fascia on trusses?

What is rake board on a house?

March 22, 2013. Rake board gives your roof and the eaves the finished look you want to really enhance the ambiance of the exterior appearance. This is the name given to the board that you place on along the slope of the roof of your home.

Can I use 1×6 for fascia?

Fascia Board Sizes #1 – 1×6

Standard gutter size for residential homes is five or six inches. At the backside of a 5 inch gutter, the fascia board mounting area will be four inches tall. On a six inch gutter, the mounting area is 5 inches.

How far should sheathing overhang fascia?

Ideally the sheathing should be on top of the fascia without extending beyond it. Guesswork can create a situation in which it extends too far and it interferes with flashing installation, or you have to cut it. If the fascia is to be one layer of 1x, I overhang the sheathing 5/8.

How do you attach a fascia board to a rafter?

Instructions for How to Attach Fascia Board to Roof Trusses

Mark the place closest to the end of the board that aligns with the center of a joist. Use the carpenter’s square and pencil to put a straight line at the mark. Cut the board with a miter saw. Position the board against the trusses and nail it in place.

Should I use pressure treated wood for fascia?

It’s not necessary to use pressure-treated lumber for fascia. In fact, most planking sold for fascia is not pressure treated. However, it is vital that the fascia be primered and completely painted with a good quality exterior enamel or acrylic paint.

Should I use treated lumber for my fascia board?

Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. … Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.

Can you use cedar for fascia board?

Commonly referred to as a durable species, cedar is a very popular choice for construction, siding, and, yes, fascia boards. … This makes cedar quite an ideal material in terms of retaining its shape while at the same time taking to staining and nailing well.

How do you replace a section of fascia board?

How do you cut a groove in fascia board?

What type of plywood is used for soffits?

Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.

How long do fascia boards last?

Well installed and maintained wooden fascia can last for up to 20 or 30 years, before they start deteriorating. Although some might need replacing within 5 to 10 years.

How much does it cost to replace fascia boards?

Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.