A broken necklace clasp should not give you migraines on what to do going forward. Fixing it is pretty simple and straightforward. With our simple guide here, we guarantee you that your necklace has not gone to waste. You can still wear it again.

How to fix a broken necklace clasp

  1. Get all items ready. You should prepare all the apparatus required in the process.

These items include:

  • Jewelry Pliers – 2 pairs- it will help you in removing the broken clasp.
  • Lobster Clasp- this will act a replacement of the broken clasp.
  • You can conveniently get these items from your nearest jewelry store.
  1. Take your necklace that has a broken clasp to a working table
  • Ensure that the table is clear so that you have enough working space.
  1. Slowly open the jump ring on the necklace that is attached to the broken lobster clasp
  • Pinch each side of the ring using either the needle nose pliers or use the two pairs jewelry pliers.
  • On one side, pinch forward while the other side, pinch backward.
  • Don’t try to pull the pliers straight apart as this will end up messing the shape of the ring thereby leading to permanent damage.
  1. After that, gently remove the broken lobster clasp and slip in the new lobster clasp onto the opening of the ring
  • Using the pair of pliers close the ring in a rocking motion.
  1. You can now wear your necklace with your favorite matching dress

Pendant is an important part of your necklace. It is what people come into contact with before they get to see clearly the necklace itself. It can be heartbreaking to see your pendant broken but do not worry there is always away to fix it.

How to fix a broken necklace pendant

  • Asses the type of damage. Before you kickstart the process of fixing a broken necklace pendant the first thing is to access the damage. The common issuses include broken bail and damaged design.
  • Look out the design. Clearly evaluate the design of the necklace. This will help you take note issues that may have serious consequences on the repairing process. Look out the materials used to design the necklace especially the pendant.
  • Work on the damage. Having identified the type of damage and the design of the pendant, it is now time to get down to work and repair the broken necklace pendant. Depending on the nature of the damage there are numerous ways to approach the issue. Here is a break down issues and how to repair them.
  • Broken bail. This is the part of the pendant that attaches the pendant to the chain. The type of damage should guide you on the methodology to use. Apply solder which acts as glue if the bail is wrenched open. If the bail is squashed attempt to reshape it or replace it with a new one.
  • General design repair of the pendant. If this is the case as you can use pliers or solder to make adjustments aimed at dealing with any structural damages.
  • Lastly, do the final finishing. Once you have completed repairing the pendant. There is a need to restore it to its original form.
  • During the repairing process there is a lot of scratching that could end up distorting your pendant.
  • Depending on the design of the pendant here are ways to ensure your pendant retains its original pristine condition.
  • Polish your pendant using the polishing motor to rub any rough spots.
  • Send the jewelry to the plating tank if you need to recolor the pendant.

How to Fix a Broken Necklace Chain

  • Clearly examine where the break appears. Ensure there is an open link on one end and closed link on the other link.
  • If both ends are open, use pliers to close one end.
  • Then, hook the closed link of the necklace to the open ink of the necklace.
  • Using you pliers or needle pliers ensure you close the ends of the open link. The closed link must be inside the open link before you carry out this step.
  • Ensure there is a continuous linkage and it is hard to notice any breakages. You can test this by pulling it either side.

Is it possible to fix a broken necklace chain?

However, it can be soldered, but will require a little more work due to the complexity of the links. Depending on the severity of the break, the jeweler will need to “weave” the links back together before soldering to ensure that the repaired part looks indistinguishable from the rest of the necklace.

How much does it cost to fix a broken necklace?

Soldering a Broken Chain: $20-$230

If the chain on your favorite necklace breaks, you can fix it by getting it soldered back together. This will cost you anywhere from $20 to $230 depending on the type of metal and the area of the chain that needs to be soldered.

How do you fix a broken chain?

How can I temporarily fix a broken necklace?

Use a Pencil Eraser as an Earring Back in a Pinch

Keep going until the ring sits in the middle of the paperclip. Then, whenever you want to wear the necklace, slide the other side of the clasp (the loop part) onto the paper clip and stop when it gets to the first curve.

How do you fix a broken necklace clip?

How do you fix a broken necklace at home?

How do you fix a broken gold necklace?

What does a broken necklace mean?

Given the symbolism it holds, a broken necklace is therefore commonly considered a bad omen, even if it happens in a dream. In the case that the necklace was a gift, it is seen as a symbolic bond. So, if the necklace breaks, it’s seen as a sign that that bond is going to end or has ended.

Can you fix a gold pendant?

Repair the damage

It may be open or squashed; in cases where the bail has thinned out or is wrenched open, the jeweler will apply solder. If the bail is squashed, the jeweler can either attempt to reshape it, or replace it entirely with a brand new one.

How much is a 14k gold chain worth?

All I can tell you with certainty is that if pure gold is selling for $1300/oz. and the weight of the 14k chain is 20 grams, then the melt price of the gold is worth $484.88.

How do you fix a bail pendant?

The bail is either attached directly to the pendant, or soldered to a loop at the top of the pendant. This key pendant’s original bail had completely snapped off, requiring a replacement. Partially-intact bail: The jeweler can rebuild the bail by placing some metal and soldering the loop closed.

How can u tell if a gold chain is real?

Does real gold sink or float?

Does Walmart sell real gold jewelry?

Real gold will sink to the bottom because it’s denser than water. Gold will also not rust, so if you see any signs of rust you know your piece isn’t real gold, and there’s no worry about damaging your item if it is indeed real gold.

Can fake gold be stamped 14K?

Real Gold Jewelry – Walmart.com.

Is real gold always stamped?

Is 14K gold cheap?

5) Gold Stamp:

Look for a karat stamp; 10k (also written as 417), 14k (585), 18k (750), 24k (999). Fake items are generally not stamped at all, or they’ll say things like 925, GP (gold plated), or GF (gold filled).

How can you tell a fake diamond?

Nearly all real gold is stamped with a hallmark that notes the karat weight of the jewelry, like 10K or 14K. 999″ or “1.000” would be pure gold and thus the same as 24 karat. Nonetheless, if an item of jewelry does not have this stamp – it is not necessarily proof positive that the item is made from fake gold.