As humans, it is in our nature that we love to eat great food and it has been like this for many centuries.

To eat well, we have modified our ways of cooking over the years to provide us with more flavors and to add a new taste to our dishes.

However, the amount of modern-day use of oils and fatty foods can cause one serious problem and that is cleaning the kitchen.

This is why we think the installation of range hood vents will make cooking more fun and keep the kitchen clean at the same time.

Installing a range hood vent through the ceiling not only prevents bubbles from collecting on the cabinet, but it also helps to remove the awful smell that might develop over time.

Now, this might sound like a good idea, but the thought of having to install a hood vent causes many people to become skeptical of the whole idea which is not true at all.

It can be very easy if you have the required tools for it. This post lists the steps you’d need to follow to install a range hood vent through the ceiling along with the equipment you’ll need.

Required Equipment

Before you start installing a range hood vent through the ceiling, make sure you have the following equipment with you:

  • Electric wires
  • Iron piping
  • Vent cap
  • Wire clamps
  • Rangehood
  • Duct
  • Pipe clip
  • Cable nuts
  • Screw holders
  • Pipe flasher

Once you’ve collected the desired tools, follow the 9-step guideline below to install your range hood vent through the ceiling.

Step 1: Disassembling The Range Hood Vent

It becomes quite easy to install any piece of equipment if you first disassemble it into its basic components.

You have to loosen the member parts and once you’re done with the essential parts, you attach the other parts.

The components that have to be detached are the fan and the range hood vent filter.

Step 2: Marking Spots on the Ceiling

Ensure that the spots that you mark on the ceiling are precise; this will be highly important.

Use a measuring tape to take the exact size of the vent.

After that, head towards the ceiling and use a marker to highlight the spots.

Step 3: Using The Electric Drill Puncture Holes

After marking the spots, the next step would be to drill holes in the wall. This is done with the help of an electric drill.

Make sure you drill holes for the vent as well as for the electric wires.

This is an important step and any small fault will cause this whole procedure to go south.

Step 4: Boring A Hole in The Ceiling

To carry this out, you’ll be needing different tools depending on the type of your ceiling.

It won’t work if you use the same tools for wood ceilings and a concrete one. This task might be a bit difficult for first-timers; however, experienced people will have no problem at all.

Just do your best to make sure to drill a hole that lets the range hood out of the ceiling.

Step 5: Fixing The Detached Units

Remember some parts of the units that you had removed?

Now is the time to fix them back in so you can install the device accurately.

Be careful with the wire tips. Once you’re done with this, you are now ready to mount the range hood vent.

Step 6: Mount the Range Hood Vent

The previous steps have been leading up to this one.

Ensure no unit is left out and make sure they are all well fused.

Then, duct the nook of the vent jointly in one place and fix the range hood onto the ceiling.

Step 7: Wrapping Up the Range Hood

After mounting the vent, the next step is to make sure it is properly fixed.

Use ceiling tar to wrap up the hood to keep it steady.

This step might be a little tough but if you’ve mounted something before, it’s going to be an easy task.

Step 8: Concluding The Process

Then comes the concluding part of the installation where you have to put back any appliance that you might have taken; for example, your fan.

Make sure all the contacts and connections are secure as well to avoid any unfortunate incidents.

Step 9: Tidy up:

The last thing to do would be to tidy up, after all, you wouldn’t want all your efforts to be nullified just because of not cleaning up properly.

Wrap UP:

Installing a range hood vent improves the air circulation throughout the kitchen.

Moreover, a comfortable environment in the kitchen helps out a lot in the whole cooking process and makes it much easier. Following these steps will help save a lot of money and give you a sense of achievement as well.

So why hire professionals when you can do it as well just by following these easy steps?

Is it OK to vent range hood into attic?

No, you should never vent your range hood into the attic. The excess buildup of grease and moisture in your attic will ruin it and over time may cause mold damage. Instead, vent your hood through an interior wall or through the ceiling all the way outside of your home.

Can you duct Rangehood into ceiling?

Ducting a rangehood into void spaces, ceiling or roof cavities is deemed a FIRE HAZARD.

Do range hoods have to be vented outside?

To summarize, most U.S. states require range hoods to vent to the outdoors. You can’t vent into an attic, crawlspace, wall cavity, or anywhere that isn’t to the exterior. But for your own health, homeowners should avoid improperly ducted range hoods.

How do you install a ceiling mount range hood?

How expensive is it to install a vent hood?

The installation cost of a vent hood is between $100 and $1,000. The main reason for this wide cost range is the amount of ductwork you need to install. Vented, or ducted, hoods use a duct to completely remove hood exhaust from your home, including air, fumes and smoke.

How do you install a vent under a range hood?

Who should install a range hood?

Any contractor should be able to install your range hood. But, an HVAC or renovation contractor will be your best bet. If you don’t want to hire a contractor, you can install your range hood yourself.

Can you install your own Rangehood?

Range hood installation can involve drilling a new vent hole through a wall, which can require new wiring and ductwork, while replacing old ones can be a simpler process. This guide reviews how to install a range hood and remove an old one. Tip: Before you purchase a range hood, check the CFM rating of its fan.

How well do ductless range hoods work?

A ductless range hood works by sucking greasy kitchen air through mesh or baffle filters. Ductless range hoods improve your indoor air quality, but they are not as effective as ducted range hoods.

Do ductless range hoods plug in?

Ductless range hood models do not vent to the outside of your home; the fan circulates air through a charcoal filter. Most basic range hoods are directly wired into the home’s electrical system, whether they are ductless or ducted.

What type of duct is best for venting a range hood?

Rigid duct is the best type of duct to vent your range hood. It requires a one-time installation and little to no maintenance as long as you clean your range hood filters. Most rigid ductwork is made from durable stainless steel, as opposed to rigid ductwork which is aluminum or flimsy plastic.

Is vent hood required by code?

Is a range hood required by code in California? In California, vent hoods are required that produce 100 cfm or more intermittently or produce 5 air exchanges in one hour. This is required in all residential areas, remodeled homes, or areas that are 1000 square feet or larger.

Do all cooktops need to be vented?

Although it is a desirable option, a regular kitchen cooktop does not need to be vented and exhausted to the outside. A downdraft cooktop and grill must be vented from the kitchen to the outside, following manufacturer’s specifications.

Do I need a hood in my commercial kitchen?

Ventilation systems (also known as hoods) are required in a commercial kitchen setting. They provide fire protection for the kitchen and create a comfortable working atmosphere for your staff and a pleasant experience for your residents by removing odors, heat, steam, grease and smoke.

What commercial kitchen equipment requires a hood?

Mechanical ventilation hood systems are required above all high-temperature dishwashing machines (except under-counter models) and cooking equipment, including ranges, griddles, broilers, steam jacketed kettles, ovens, large popcorn machines, deep fryers, barbecues, rotisseries, and any equipment that produces cooking

Does a proofer need to be under a hood?

Electric equipment can sometimes get around the requirement and make it practical to cook without a hood, but not always. Hood systems serve as the ventilation for commercial kitchens. If you are using an electric oven or griddle to cook greasy foods that will produce a lot of smoke, a hood may be needed.

Does a commercial steamer need to be under a hood?

Most traditional steamers are required to be under a hood; at least a condensate hood. They also typically require a water line and a drain. There are also very few exceptions to the requirement of a water filtration system. Today there is microwave technology for steaming that doesn’t require any of the above.